Test Standard Category

C373-10N Cross Hole Ultrasonic System, TWO channels, for deep foundations

( Concrete )

  • ASTM D6760-02

The Cross-hole Sonic Logging (CSL) method is used to perform high-resolution quality control on deep foundations.
The system uses an ultrasonic wave sent from an emitter to a receiver while both are pulled through water-filled access tubes embedded in the concrete. The measured arrival time and energy are directly related to concrete quality.
The control unit must be connected via USB port standard to a regular notebook computer or Tablet PC (not included) on which, should be installed the software (included) for testing, analysis and real time reporting in 2 D Tomography.
Easy to use: the user-friendly software makes it possible to master the instrument in less than a day. No additional expensive training required.
Powerful tomography features are available.

Dimensions: 430x325x105 mm (instrument only).

Weight: 3.8 kg (instrument only).

 

 

 

 

 

 

 

 

Request information

Cross-Hole

  • ASTM D6760-02
SPECIFICATIONS: - Housing: rugged, environment-proof, water-resistant housing. - Temperature range: -25 to 60 °C (operating), -40 to 70 °C (storage). - Transducers: dual-purpose transceivers, 50 kHz nominal, pressuretested housing, 25 mm diameter. - Cables: detachable heavy-duty polyurethane wound on reel. - Cable length: 50 m (100 m and 150 m cables are available upon request). - Sampling rate: 500 kHz (2 μs resolution). - Gain: 8 level automatic gain control (AGC). - Depth meters: two 24-bit counters, <0.1% error. - Pile measuring range: 1 to 145 m - Tube spacing: up to 4 m in good concrete. - Productivity: up to 3000 m/Day by a single operator. - Memory storage: unlimited. - PC minimum requirements: Windows 2000/XP, 300 MHz, 128 Mb, 800x600 resolution (not included). - Reporting: arrival time, energy and wave speed curves, “waterfall” presentation, dual presentation, fuzzy-logic, tomography. - The package includes: a computerized central unit, two ultrasonic transducers, two 50 m cable reels, two depth meter pulleys, cables and AC power adapter, and the software. - Language: Multi-lingual user-interface and reporting. - Power supply: internal rechargeable lithium ion battery (two days of typical use), external 100-240V AC (operation/charging). - Dimensions: 430x325x105 mm (instrument only). - Weight: 3.8 kg (instrument only).