Moisture condition value (MCV) and chalk crushing value (CCV) This apparatus is used to measure the minimum comparative effort required to produce near full compaction of a soil, and the rate at which a sample of chalk lumps are crushed.The unit can be used to classify chalk as a fill material with ...
This mould, vertically split on one side, foreseen of clamp attachment to the base plate, plated against corrosion, is utilized for determining the degree of compaction of bituminous pavaments, for quality control purpose.Weight:12 Kg
Used for a smooth and rapid extrusion of soil samples from tubes also of thin walls with minimum disturbance. The unit extrudes samples from Ø 35 up to 150 mm (external diameter 160 mm) with max. stroke of 900 mm.The hydraulic piston is equipped of speed adjuster and can be stopped in any exc...
It provides an alternative method for the compaction of soil samples in the determination of dry density/moisture content relation (called Proctor), unconfined compressive strength of stabilized soils and CBR tests. This hammer is also used for the compaction of asphalt in the percentage r...
CBR loading machine, hand operated, field model The load is applied through a mechanical jack with handwheel. The upper beam can be adjusted in height. The S210KIT machine comprises:S221 Conversion frameS221-01 Mechanical jack 50 kN capacity (provided with its support)S370-10 Load ring 50 kN capacit...
Automatic, programmable PROCTOR / CBR Compactor with microprocessor, “high technology” Designed to compact Proctor and CBR specimens, it ensures an extremely uniform compaction degree, granting reliable and repeatable test results. The microprocessor software allows to select and perform...
TEST GAUGE, to check the condition of the cone point 60° angle.
S165-01KIT S165 KIT S165-02 KIT S166 KITTEST CONE 60°angle and 60g weight (liquid limit and shear strength tests).
S165-01KIT S165 KIT S165-02 KIT S166 KITCBR mould complete with collar and perforated base: Dia. 152 mm x 127 mm height
S199CBR loading machine, hand operated, laboratory model Load is applied through a meckanical jack and handwheel. Upper beam can be adjusted in height.Foreseen of fast approach device of the base plate. The S209 KIT CBR machine comprises:S209-01 CBR laboratory frameS212-01 CBR penetration pistonS370-10 ...
Filter screen, stainless steel, 149 mm mesh 0.150 mm (ASTM n° 100)
Tripod (dial gauge support)
No results