Used for the verification of the calibration of the concrete test hammers. Special steel alloy made. Dimensions: Ø 150 by 320 mm.Weight: 16 kg approx. NOTE: The EN 12504:2 Specification requires obligatory the use of the anvil for the hammer tests.The Standard specifies: Before a sequence of...
C381The top quality test hammer available on the market. Suitable for finished concrete structures and buildings having strength resistances from 10 to 70 N/sq.mm. This concrete test hammer, entirely produced by Matest, has aluminium frame and thanks to its very accurate manufacture processing and selec...
Exactly the same to mod. C380, but with calibration curve chart in PsI values as requested by ASTM Specifications.
LOW IMPACT ENERGY MODEL This impact hammer is used for rock classification test. The core rock specimen normally NX 54.7 mm diameter is held on a special cradle (accessory) in horizontal position, and the hammer tests the same in all its length, to obtain an average of the readings. Impact energy: 0...
Especially suitable for materials with low strength such as mortar, cement or finishing materials.Spring impact energy 0.169 J.Working range below 25 MPa. Dimensions: 400x200x150 mmWeight: 5 kg
This digital concrete test hammer, microprocessor operated, entirely designed and manufactured by Matest with advanced technology, performs basic concrete testing with continuous automatic recording of all parameters in accordance with EN 12504-2 Specifications, register and process data and then tr...
No results