These cylinder cappers are used to obtain plane end surfaces perpendicular to the axis of the cylinder. Different models are available: Model Cylinder Ø x h Weight Kg C290-01N 150x300 mm, 6"x12" 9.5 C291-01 160x320 mm 6 C292-01N 100x200 mm 6.3 C294-01 250x500 mm 41 C294-05 6...
Cylinder carriers, for an easier handling of the specimens.Weight: 1.4 kg Two available models: C290-02: Cylinder carrier for dia. 150x300 mm, 160x320 mm and 6"x12". C294-02: for dia. 250x500 mm
Vertical cylinder cappers. 2 models available, depending on the cylinder diameter: C294-01: for dia. 250x500 mm C294-05: for dia. 60x120 mm
Melting pot for capping compound. Inexpensive model Used to melt the sulphur capping compound. Complete with thermoregulator. Suitable also for general laboratory purposes. Capacity: 4 litres Power supply: 230V 1ph 50/60Hz 1500W
Capping compound, ultra strong flake typeThis compound is a mixture of sulphur and mineral filler; the compressive strength of 8000 - 9000 Psi is granted (at two hours) on a 2” cube specimen, as requested by ASTM C617 Standards.On a 150 mm dia. cylinder the compressive strength is 16000 Psi. M...
Steel capping plate, used for capping concrete blocks up to 500x300 mm.The plate surface is accurately machined.Dimensions:500x300x20 mmWeight: 30 kg approx.
To obtain plane end surfaces perpendicular to the axis of the cylinder. Capping set for cylinders dia. 100x200 mm Weight: 6.3 kg
HIGH STRENGTH GYPSUM CAPPING COMPOUNDThe compressive strength after 30 minutes is greater than 8000 psi.Water/gypsum ratio: 17-18%Bag of 25 kg (55 lbs)
No results