Portable poker vibrator, mains operated.Tip dimensions: Ø 25 mm by 290 mm long.Flexible shaft 2 meters long.Frequency: 12000 vibr./minute.Amplitude: 0.65 mmCentrifugal force: 0.8 kN (80 kg) Power supply: 230V 1ph 50/60Hz 2300WDimensions: 180x350x220 mm approx.Weight: 9 kg approx.
These cylinder cappers are used to obtain plane end surfaces perpendicular to the axis of the cylinder. Different models are available: Model Cylinder Ø x h Weight Kg C290-01N 150x300 mm, 6"x12" 9.5 C291-01 160x320 mm 6 C292-01N 100x200 mm 6.3 C294-01 250x500 mm 41 C294-05 6...
Cylinder carriers, for an easier handling of the specimens.Weight: 1.4 kg Two available models: C290-02: Cylinder carrier for dia. 150x300 mm, 160x320 mm and 6"x12". C294-02: for dia. 250x500 mm
Vertical cylinder cappers. 2 models available, depending on the cylinder diameter: C294-01: for dia. 250x500 mm C294-05: for dia. 60x120 mm
Melting pot for capping compound. Inexpensive model Used to melt the sulphur capping compound. Complete with thermoregulator. Suitable also for general laboratory purposes. Capacity: 4 litres Power supply: 230V 1ph 50/60Hz 1500W
Capping compound, ultra strong flake typeThis compound is a mixture of sulphur and mineral filler; the compressive strength of 8000 - 9000 Psi is granted (at two hours) on a 2” cube specimen, as requested by ASTM C617 Standards.On a 150 mm dia. cylinder the compressive strength is 16000 Psi. M...
Steel capping plate, used for capping concrete blocks up to 500x300 mm.The plate surface is accurately machined.Dimensions:500x300x20 mmWeight: 30 kg approx.
Portable poker vibrator, petrol operated.Honda motor, 4-stroke, 1.6 HP, 35.8 ccTip dimensions: Ø 25 mm by 250 mm long.Flexible shaft: 2 metres long.Frequency: 10000 vibrations/min.Supplied complete with knapsack.Weight: 7 kg approx.
Poker vibrator, battery operated, original Makita.Tip dimensions: Ø 25 mm by 250 mm long.Flexible shaft: 800 mm longFrequency: 13000 vibr./minuteBattery power: 18V 3.0Ah Supplied complete with rechargeable battery and battery charger, original Makita.Weight: 3 kg approx.
To obtain plane end surfaces perpendicular to the axis of the cylinder. Capping set for cylinders dia. 100x200 mm Weight: 6.3 kg
HIGH STRENGTH GYPSUM CAPPING COMPOUNDThe compressive strength after 30 minutes is greater than 8000 psi.Water/gypsum ratio: 17-18%Bag of 25 kg (55 lbs)
Made from steel sheet, zinc coated to prevent it from corrosion. Complete with base rack and stopper for an easy water discharge. Supplied without thermostat heating system, to be ordered separately.The tank can accommodate up to 64 cubes 150 mm side, or up to 48 cubes 200 mm side.Capacity: 100...
Same as mod C302 but having: Water discharge cock incorporated into the tankInside dimensions: 1100 x 710 x h 690 mm Overall dimensions: 1200 x 800 x h 850 mm Weight: 55 Kg
Made from extremely robust and stable polyethene, complete with a base rack. Supplied without thermostat heating system, to be ordered separately (see accessories). 2 different models are available: C302 KIT 650 litres capacity Inside dimensions: 1040X1040X605 mm Weight: 60 kg approx. C302-10...
No results