Stainless steel made, with 12 slots, they are supplied with two collecting pans. Opening: 1/2" (12.7mm)Weight:1.2kg
The liquid limit device is used to determine the moisture content at which clay soils pass from a plastic to a liquid state. This model is hand operated with left side crank and hard rubber base. Weight: 3 Kg approx
Used for the precise division into two representative portions of materials such as: aggregates, sand, gravel and similar. Painted steel made, it is supplied with two collecting pans.
Used for the precise division into two representative portions of materials such as: aggregates, sand, gravel and similar. Painted steel made, it is supplied with two collecting pans.
Used for the precise division into two representative portions of materials such as: aggregates, sand, gravel and similar. Painted steel made, it is supplied with two collecting pans. Opening:1 1-2” - 45 mm Weight: 12 kg
Available in the following models: V112: Ø100mm x 60 mm height V112-01: Ø 125mm x 65 mm height V112-02: Ø 150mm x 76 mm height V112-03: Ø 180mm x 92 mm height V112-04: Ø 200mm x 100 mm height
Mortar and pestle, porcelain, diameter 125 mm
Pipette method The complete set comprises: S144 Andreasen pipette, 25 ml capacity, for an accurate extraction of the quantities of soil in suspension for analysis. S144-01 Pipette stand to accurately raise and lower the pipette with no transmission of vibration to not disturb the sample suspension....
Mould to produce a specimen of 140 mm.long x 12.5 mm radius. This test covers the determination of linear shrinkage of soils and indicates the plastic properties of soils with a low clay content. Weight:500 g
This liquid limit device is motor operated at 120 drops/min speed, with hard rubber base.Power supply : 230V 1ph 50HzWeight: 3.5 Kg
Used for the precise division into two representative portions of materials such as: aggregates, sand, gravel and similar. Painted steel made, it is supplied with two collecting pans.
Sample splitter designed for the reduction of test samples which are too large in volume to be conveniently handled. It handles any material from sand sizes up to dia. 108 mm. Each chute bar is 12 mm wide so that openings of 12-24-36-48-60-72-84-96-108 mm are possible. Complete with two collecting p...
Used for the precise division into two representative portions of materials such as: aggregates, sand, gravel and similar. Painted steel made, they are supplied with two collecting pans. Multiple models available: A064: slot width 3-4", 19 mm; max. size sample 13 mm; slot number 12, weight 11 ...
Used to determine the maximum moisture content at which the soil does not shrink after drying the sample. Complete with carrying case. The set comprises: V122-04 Shrinkage dish, Ø 45x12.7 mm (2 pieces) V122-03 Crystallizing dish, Ø 57x32 mm S175-03 Shrinkage prong plate, made from ple...
Used to determine the specific gravity of soils, it rotates two gas jars at approx. 50 rpm to satisfy BS Standard.The shaker is equipped with an original friction device conforming the unit to CE Safety Directive.Supplied without gas jars to be ordered separately.Power supply: 230V 50Hz 1ph 150...
S143 KITUsed for the precise division into two representative portions of materials such as: aggregates, sand, gravel and similar. Painted steel made, it is supplied with two collecting pans.
Used for the determination of specific gravity and water absorption of sands and fine aggregates. Glass jar with aluminium cone and rubber seal.Capacity: 1 kg
ADAPTOR (ring and tamper) for S111 and S112 Extruders: Dia. 150mm
S111 S112Rubber heated pestle for soil mortar.
The plastic limit determines the lowest moisture content of a soil, by wich a sample can be rolled into threads Ø 3 mm without breaking the same neither longitudinally or transversely. The set complete with carrying case comprises:- S178-01 Glass plate 300x250x10 mm- S178-02 Rod caliper &Osla...
Used for splitting materials such as aggregates, sand, gravel and similar into two representative portions. Stainless steel made, they are supplied with two collecting pans. Two models available: Model Slot width Max. size sample mm Slot number Weight Kg Spare collecting pan A062 1-4" - 6.3 mm ...
SMARTIP is a smart automatic apparatus for the determination of the needle penetration value. The instrument automatically reaches the contact point before starting the test and the penetration result is measured thanks to a high performance contactless displacement transducer. MAIN FEATURES: Fully...
No results