This apparatus is used for determining the reactivity on slaking of ground quicklime.The equipment consists of a Dewar vessel 1000 ml capacity complete with cover, electric stirrer 300 rpm. complete with stirring paddle (propeller), base with stand, digital thermometer range -50 +200°C. subd. 0....
AUTOMATIC PROGRAMMABLE COMPUTERIZED MORTAR MIXER HIGH-PERFORMANCEMixmatic has an extremely sturdy fabricated frame for an intensive laboratory use. Complete with stainless steel polished beater, mixing bowl and automatic sand dispensers having dimensions and geometry to grant the correct sand insert...
Used to determine the loss on ignition of cement and lime; chloride, carbon dioxide, and alkali content of cement.Max. temperature: 1100 °CChamber stability: ± 1 °CChamber uniformity: Absolute The chamber, ceramic-made, is not resistant to aggressive chemical material samples.Inside d...
The apparatus allows a sample to fall from a known height into a volumetric container. Consisting of a hopper, one litre cylindrical container and spring loaded trap. Weight: 5 Kg approx.
Hand operated flow table according to EN 459-2, EN 1015-3 and EN 13279-2 Standards. Table dia.: 300 mm Drop height: 10 mm
Designed to determine the air content in cement mortar, cement paste and lime mortar. Made from cast aluminium, the test pot one litre capacity and the upper part are air-tight sealed by means of two quick action spring clamps. The whole is connected to a dial gauge directly indicating the air ...
Same as mod. E027, but with incorporated an electric mini-compressor giving air pressure and keeping it constant all along the test. Power supply: 110-230V 1ph 50-60 Hz Two different capacities are available as follows: E028: 1 litres capacity E028-02: 0.75 capacity, conforming to EN 413-2 Specific...
MASONRY CEMENT AND BUILDING LIME CONSISTENCYUsed to determine the consistency of fresh mortar, lime and masonry cement.The base is foreseen of a device to locate the test cup. The height of the drop can be accurately adjusted to 100 mm.Supplied complete with test cup and tamper, both anodized alumin...
SOUNDNESS OF BUILDING LIME DETERMINATION This bath is used for the determination of the soundness of building limes subjected to steam action at atmospheric pressure for 180 minutes time. The steam bath, all stainless steel made, holds up to 12 Le Chatelier moulds, approx. 50 mm over the water level...
YIELD OF LIME-BUILDING LIME This insulated vessel is used to determine the yield of lime by leaving the lime sample to slake into. Stainless steel made, double walled insulated with glass fibres, the cylinder has inside dimensions Ø 113 by 140 mm deep. Supplied complete with cover....
Digital dial gauges, with readings in mm (subdivision 0.001 mm) and inches (subdivision 0.0001”), battery feeded.Complete with battery and RS232 port for PC connection. S382-01: 12.7 mm travel by 0.001 mm subdivision S383: 25.4 mm travel by 0.001 mm subdivision
C365 C254-01Thermo-hygrometer, digital, portable, with detacheable probe, it measures and displays in a short time both relative humidity and temperature. Measuring range 10.0 to 95.0 %RH; Resolution 0.1 %RH or 0.1°C; Accuracy +/- 3%RH or +/- 0.5 °C; Application temperature 0.0 to 50.0 °C Bat...
E139Flow caliper to EN 459-2 and EN 1015-3 Standards.
E087 KIT E090-01KIT E090 KIT E086 KITFilling hopper to fill the mould (of flow tables).
This very robust mixer is expressly designed for the efficient mixing of cement pastes and mortar, with four automatic sequences of mixing cycle, in compliance with: EN 196-1, EN 196-3, EN 480-1 Specifications.Bowl capacity is 4.7 litres Two speeds can be selected: 140 or 285 rpm for the...
Basically similar to mod. E093N, but not equipped with automatic program, sand dispenser and safety door.Two speeds can be selected. Supplied complete with stainless steel bowl, but without beater which has to be ordered separately.This mixer can be supplied only to extra CE markets.Dimensions:...
Mortar mixer, 5 litre capacity, similar to mod. E094N but complete with sand dispenser and safety door to CE Safety Directive. Two speeds can be selected. Supplied complete with stainless steel bowl, but without beater which has to be ordered separately.Dimensions: 450x480x760 mmWeight: 45 Kg a...
Motorized flow table according to EN 459-2, EN 1015-3 and EN 13279-2 Standards. Table dia.: 300 mm Drop height: 10 mm
Same as model E094N but equipped also with a sand dispenser.
No results