Used to determine quickly and efficiently the bearing capacity of soils on road constructions, foundations, road subgrades etc. The S220KIT tester comprises:S221-01 Mechanical jack 50 kN capacity (provided with its support)S370-09 Load ring 40 kN capacity S212-01 CBR penetration pistonS377 Dial gaug...
CBR loading machine, hand operated, field model The load is applied through a mechanical jack with handwheel. The upper beam can be adjusted in height. The S210KIT machine comprises:S221 Conversion frameS221-01 Mechanical jack 50 kN capacity (provided with its support)S370-10 Load ring 50 kN capacit...
Automatic, programmable PROCTOR / CBR Compactor with microprocessor, “high technology” Designed to compact Proctor and CBR specimens, it ensures an extremely uniform compaction degree, granting reliable and repeatable test results. The microprocessor software allows to select and perform...
Standard rammer 50.8 +/- 0.13 mm diameter and 2491.25 +/- 1.25 g weight
S199SOFTWARE UTM2 (Universal Testing Machine 2)Developed for the management and the remote control through PC of Matest testing machines.Licence for CBR Test
B044M-SET S215AWEIGHT, 320 g to be added to the cone 30°angle, to get a total weight of 400g (shear strength test).
S165-01KIT S165 KIT S165-02 KIT S166 KITA selector switch enables the operator to choose type of compactionrequired (circular blow pattern for 4” or 100mm specimen mouldsand double concentric circles for 6” or 150 mm specimen moulds).Height of rammer drop adjustable to 305 mm or 457 mm. Thanks to its compact height design, the...
CBR loading machine, hand-operated, laboratory model Load is applied through a mechanical jack and handwheel. The upper beam can be adjusted in height.Foreseen of fast approach device of the base plate. The S209 KIT CBR machine comprises:S209-01 CBR laboratory frameS212-01 CBR penetration pistonS370...
CBR mould complete with collar and perforated base: Diameter 6” (152.4 mm) x 7” (177.8 mm) height
S199Split CBR mould with collar and perforated base. 6” (152.4 mm) x 7” (177.8 mm) height.
Solid base plate for CBR mould.
Perforated base for CBR mould.
Filter screen, stainless steel, 149 mm mesh 0.150 mm (ASTM n° 100)
Spacer disc with "T" handle. Ø 5 15/16” (150.8 mm) x 2.416” (61.4 mm) height
Perforated (sweel) plate with adjustable steam.
Tripod (dial gauge support)
Annular surcharge weight 2270 g Annular surcharge weight 2300 g
Slotted surcharge weight 2270 g
ASTM, NF, BS
Proctor rammers are steel made, plated against corrosion and available in different models according to the various International Standards in use. Ø 50.8 mm fall height 457.2 mm, weight 4.54 kg. Ø 50 mm fall height 457.2 mm, weight 4.54 kg.
Ø 150 mm
600x400x400 mm
Used to extrude samples having diameters of 4”, 6”, 100 mm, 150 mm. It can therefore extrude CBR, Marshall and Proctor specimens. The extruder is actuated by a 50 kN hydraulic jack, having ram travel of 190 mm + 170 mm screw.Supplied complete with adaptors.Dimensions: Ø 300x500 m...
Hand-operated hydraulic jack, 30 kN capacity. Suitable for the extrusionof 4” diameter specimens from the mould. Dimensions: Ø 200x400 (h) mm.Weight: 20 kg approx.
CBR loading machine motorized, 50 kNMotorized speed rate 1.27 mm/min Load is applied through a screw jack driven by an electric motor at a constant penetration rate of 1.27 mm/min achieved by a built-in gearbox and assured also under load.The upper beam can be adjusted in height.Foreseen fast approa...
The frame is provided of three fixed speed ranges, easily selectable with a frequency changer (inverter) activated by an electric switch: 1.00 mm/min. for CBR tests (as Australian and old BS Standards) 1.27 mm/min. for CBR tests 50.8 mm/min for Marshall tests. Supplied without lo...
No results