This mould, vertically split on one side, foreseen of clamp attachment to the base plate, plated against corrosion, is utilized for determining the degree of compaction of bituminous pavaments, for quality control purpose.Weight:12 Kg
Used to determine quickly and efficiently the bearing capacity of soils on road constructions, foundations, road subgrades etc. The S220KIT tester comprises:S221-01 Mechanical jack 50 kN capacity (provided with its support)S370-09 Load ring 40 kN capacity S212-01 CBR penetration pistonS377 Dial gaug...
Used for a smooth and rapid extrusion of soil samples from tubes also of thin walls with minimum disturbance. The unit extrudes samples from Ø 35 up to 150 mm (external diameter 160 mm) with max. stroke of 900 mm.The hydraulic piston is equipped of speed adjuster and can be stopped in any exc...
It provides an alternative method for the compaction of soil samples in the determination of dry density/moisture content relation (called Proctor), unconfined compressive strength of stabilized soils and CBR tests. This hammer is also used for the compaction of asphalt in the percentage r...
Used to determine the in-situ density of fine graned compacted soil.The apparatus consists of: sand pouring cylinder with shutter made of cast aluminium and accurately machined, upper cylinder, metal tray with fixed centre hole for cone housing. The kit is composed by: S236-05: Cone with valve and ...
CBR mould complete with collar and perforated base: Dia. 152 mm x 127 mm height
S199The verification of the degree of compaction can be determinate on site by a simple procedure consisting essentially in removing and weighing a part of compacted soil and replacing in the hole with sand by a simple apparatus recording the volume of sand and then calculating the density of the remove...
Used to determine the in-situ density of fine graned compacted soil. Identical to mod.S236 but having cone diameter of 200 mm, recommended for coarse grained soil and gravel. The kit includes: S237-05: cone with valve and upper cylinder S237-06: metal base with center hole S237-07: calibrating cont...
Plated steel moulds used to prepare specimens bound with cementitious binders or aggregate mixes for determination of the Unconfined compressive strength of fine and medium grained soils. Several versions are available according to the Standards: S195-01 Mould Ø 50 by 122 mm to obtain ...
Perforated (sweel) plate with adjustable steam.
Filter screen, stainless steel, 149 mm mesh 0.150 mm (ASTM n° 100)
Tripod (dial gauge support)
Annular surcharge weight 2000 g
ASTM, NF, BS
Ø 50 mm fall height 457.2 mm, weight 4.54 kg
Ø 150 mm
600x400x400 mm
Used to extrude samples having diameters of 4”, 6”, 100 mm, 150 mm. It can therefore extrude CBR, Marshall and Proctor specimens. The extruder is actuated by a 50 kN hydraulic jack, having ram travel of 190 mm + 170 mm screw.Supplied complete with adaptors.Dimensions: Ø 300x500 m...
Solid base plate for CBR mould.
Perforated base plate for CBR mould.
Spacer disc with “T” handle: Ø 150 mm x 50 mm height
Split surcharge weight 2000 g
Hand-operated hydraulic jack, 30 kN capacity. Suitable for the extrusionof 4” diameter specimens from the mould. Dimensions: Ø 200x400 (h) mm.Weight: 20 kg approx.
No results