Multipurpose high flexibility testing machine Technical specifications: Servo-Plus progress 8-channel servo controlled system for a fully automatic execution of the test (mod. C104N). Load is measured by a high accuracy electric strain cell, eliminating the piston’s weight and frict...
DISTANCE PIECE 50 mm high for 5000 kN machine (C088N and C088-01N)Note: Vertical daylight of the compression platens is 411 mm. The operator will have to buy the needed distance pieces to reduce the daylight between the compression platens to get the correct daylight of the specimen under test plus ...
Upper and lower roller group for third point and centre tests on concrete beams up to 200x200x800mm.Rollers size: 30 mm dia. by 312 mm long, cadmium plated against corrosion.Span between upper rollers adjustable from 75 to 570 mm.Span between lower rollers adjustable from 75 to 1560 mm.Wei...
C095NSoftware UTM2 (Universal Testing Machine 2) for remote control of the testing machine through PC for Cyber and Servo-plus progress models. The licenses for compression and flexure tests on concrete and mortar specimens are also included in this license. For Digitec and Autotec control systems the li...
E161-02N C090-03N E161-03N C089-04N C058-05N C079-06N C088-11N E161N C025N C089-10N C056N C087-01N C088-01N E161-01N C086-03N C089-19N C088-10N C089-22N C071N C078N C041N E183NSOFTWARE UTM2 (Universal Testing Machine 2). Developed for the managing and the remote control of the MATEST Testing machines from a PC.License for flexure tests on concrete.
C079-05D C089-04A C041A C024D C070D C079-06A C089-19A C089-22A C089-17D C058-04D C091-02N C109-04N C089-21D C091-02D C025A C089-02D C055D C089-08D C090-06N C058-05A C093-02N C077D C090-06D C090-02D C071A C089-10A C078A C056A C093-02D C040DUpper and lower roller group for third point and centre tests on concrete beams up to 200x200x800mm.Rollers size: 40 mm dia. by 312 mm long, cadmium plated against corrosion.Span between upper rollers adjustable from 75 to 570 mm.Span between lower rollers adjustable from 75 to 1560 mm.Wei...
C095NFlexural device for two points and centre point tests on concrete beams Equipped with two lower rollers, one of them articulated, and two upper rollers for third point tests. Two fix distances between lower rollers: 300 and 450 mm Two fix distances between upper rollers: 100 and 150 mm It is poss...
C089-21N C076 C079-05D C089-04A C089-15 C041A C024D C070D C079-06A C089-19A C058-02 C089 C021 C089-22A C066 C051 C089-17D C058-04D C052 C089-07 C079-04 C053 C039 C024N C055N C089-04N C077N C089B C058-05N C089-21D C075 C074 C025A C040N C079-06N C088-11N C088N C089-02D C055D C089-17N C068 C025N C058 C089-08D C079-03 C089-10N C022 C036 C056N C086-02N C058-05A C087-01N C088-01N C077D C086-03N C069 C079-01 C089-16 C087N C037 C089-19N C073 C071A C038 C089-01B C089-10A C088-10N C089-22N C058-04N C089-08N C079-02 C058-01 C067 C058-03 C071N C078A C056A C089-06 C078N C089-02N C020 C054 C023 C070N C041N C089-01 C040DSoftware for flexural tests on concrete beams, equipped with Cyber-Plus Progress control system. As for the Digitec data acquisition system, the software code is C109-11.
C089-21N C079-05N C024N C055N C089-04N C077N C058-05N C040N C079-06N C088-11N C088N C089-17N C025N C089-10N C056N C086-02N C087-01N C088-01N C086-03N C087N C089-19N C090-02N C088-10N C089-22N C058-04N C089-08N C071N C078N C089-02N C070N C041NConcrete flexural machine 150 kN hand operated, 1 gauge to perform flexural tests on concrete beam specimens max. dimensions 150x150x750 (600) mm.
Concrete flexural machine 150 kN motorized, 1 gauge to perform flexural tests on concrete beam specimens max. dimensions 150x150x750 (600) mm.
Concrete flexural machine 150 kN motorized with Cyber-Plus progress touch-screen unit (semi-automatic model), to perform flexural tests on concrete beam specimens max. dimensions 150x150x750 (600) mm.
Concrete flexural machine 150 kN motorized with Servo-Plus progress unit (fully automatic model), to perform flexural tests on concrete beam specimens max. dimensions 150x150x750 (600) mm.
Concrete flexural machine 150 kN motorized with Digitec control unit to perform flexural tests on concrete beam specimens max. dimensions 150x150x750 (600) mm.
Concrete flexural machine 150 kN motorized with Autotec control unit to perform flexural tests on concrete beam specimens max. dimensions 150x150x750 (600) mm.
Concrete flexural machine 150 kN open sided frame, motorized with Cyber-Plus touch-screen progress control unit (semi-automatic model) to perform flexural tests on concrete beam specimens max. dimensions 200x200x800mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, and any type of mate...
Concrete flexural machine 150 kN open sided frame, motorized with Servo-Plus progress control unit (fully automatic model), to perform flexural tests on concrete beam specimens max. dimensions 200x200x800mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, and any type of material h...
Concrete flexural machine 150 kN open sided frame, motorized with Digitec control unit to perform flexural tests on concrete beam specimens max. dimensions 200x200x800 mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, and any type of material having max. size 600x250 mm (lower rollers...
Concrete flexural machine 150 kN open sided frame, motorized with Autotec control unit to perform flexural tests on concrete beam specimens max. dimensions 200x200x800 mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, and any type of material having max. size 600x250 mm (lower rollers...
Concrete flexural machine 200 kN, high stiffness with Cyber-Plus progress touch-screen control unit (semi-automatic model), to perform flexural tests on concrete beam specimens max. dimensions 200x200x800 mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, and any type of material havin...
Concrete flexural machine 200 kN, high stiffness, with Servo-plus progress control unit (fully automatic model) to perform flexural tests on concrete beam specimens max. dimensions 200x200x800 mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, and any type of material having max. size ...
Concrete flexural machine 200 kN, high stiffness with Digitec control unit to perform flexural tests on concrete beam specimens max. dimensions 200x200x800 mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, and any type of material having max. size 600x250 mm (lower rollers max. length...
Concrete flexural machine 200 kN, high stiffness with Autotec control unit to perform flexural tests on concrete beam specimens max. dimensions 200x200x800 mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, and any type of material having max. size 600x250 mm (lower rollers max. length...
Concrete flexural and transverse machine 150 kN with Servo-Plus progress control unit (fully automatic model) to perform flexural tests on concerte beam specimens max. size 200x200x800 mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, pipes, and any type of material having max. size 5...
Concrete flexural and transverse machine 150 kN with Digitec control unit to perform flexural tests on concerte beam specimens max. size 200x200x800 mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, pipes, and any type of material having max. size 550xh550 mm.
Concrete flexural and transverse machine 150 kN with Autotec control unit to perform flexural tests on concerte beam specimens max. size 200x200x800 mm, flat blocks, flagstones, kerbs, tiles, slabs, masonry units, pipes, and any type of material having max. size 550xh550 mm.
Unimec 300 is an electromechanical universal testing machine suitable to test different kinds of construction materials such as concrete, mortar, steel, soil, asphalt, bitumen and also plastic, rubber, wood and others. It can work in two directions, allowing to perform tests both in tension and in c...
No results