AGGREGATE IMPACT VALUE APPARATUS. BS 812 Consisting of:- A080-04 TEST FRAME ASSEMBLY- A080-02 CYLINDRICAL MOULD, dia. 102x50 mm, cylindrical measure dia. 75x50 mm, tamping rod.
Complete set of n.7 flakiness sieves.Weight: 15 Kg
These sand absoprtion cone and tamper are sed to determine the specific gravity and water absorption of fine aggregates.Weight: 500 g approx.
Used to determine if aggregate is flaky; i.e. if thickness is less than 0.6 of nominal size. Manufactured from heavy steel sheet, they have dimensions as specified by Standards. Slot width mm: 33.9Slot Length mm: 100
Used to determine if aggregate is flaky; i.e. if thickness is less than 0.6 of nominal size. Manufactured from heavy steel sheet, they have dimensions as specified by Standards.Slot width mm: 19.7Slot length mm: 80
DETERMINATION OF THE VOIDS CONTENT OF DRY COMPACTED FILLERThe apparatus consists of: cylinder having inside diameter 25.4 mm; plunger freely sliding into the cylinder with max. lateral play of 0.20 ± 0.05 mm; four columns and metallic base holding the whole. To perform the test a meas...
Used to determine the loose bulk density and voids of aggregates.Stainless steel made, the 10, 20 and 50 litres models have handles. Multiple models available: A069: 1 litre capacity A069-01: 5 litres capacity A069-02: 10 litres capacity A069-03: 20 litres capacity A069-04: 50 litres capacity
Used to determine if aggregate is flaky; i.e. if thickness is less than 0.6 of nominal size. Manufactured from heavy steel sheet, they have dimensions as specified by Standards.Slot Width mm: 26.3Slot length mm: 90
Used to measure coarse aggregate density through water displacement method.Formed by a cylindric metal container Ø 150x350 mm fitted with a siphon tube at 250 mm from bottom. Weight: 3 Kg
Used to determine if aggregate is flaky; i.e. if thickness is less than 0.6 of nominal size. Manufactured from heavy steel sheet, they have dimensions as specified by Standards.Slot width mm: 14.4Slot length mm: 60
Used to determine if aggregate is flaky; i.e. if thickness is less than 0.6 of nominal size. Manufactured from heavy steel sheet, it has dimesions as specified by Standards.Slot Width mm: 10.2; Slot length mm: 50
Cylindrical mould, dia. 102x50 mm, cylindrical measure dia. 75x50 mm, tamping rod.
A080KITSoft sieve brush having a diameter of 3 mm and conforming to BS 812.
A111NNo results