AUTOMATIC PROGRAMMABLE COMPUTERIZED MORTAR MIXER HIGH-PERFORMANCEMixmatic has an extremely sturdy fabricated frame for an intensive laboratory use. Complete with stainless steel polished beater, mixing bowl and automatic sand dispensers having dimensions and geometry to grant the correct sand insert...
Used for speed drying purposes, moisture determination, and conditioning. Similar to C313N model, but with an internal capacity of 1200 litres.Internal ventilation and two front doors with 180° opening angle. Equipped with magnetic gasket and integrated heater against freezing.Temperature and hu...
Three gang mould for 40.1x40x160 mm prisms. Manufactured from steel with hardness of inside walls over HV 200, it meets the dimensional tolerances to EN 196/1 Standard. All surfaces are grinded and all parts are marked with an identification number for a correct assembling. A part-number is engraved...
For curing large quantities of mortar, cement and concrete specimens at controlled humidity and temperature.Aluminium and policarbonate made, it is complete with precision digital thermostat and four robust shelves. The humidity from 90% to saturation is maintained through water nebulizers activated...
This very robust mixer is expressly designed for the efficient mixing of cement pastes and mortar, with four automatic sequences of mixing cycle, in compliance with: EN 196-1, EN 196-3, EN 480-1 Specifications.Bowl capacity is 4.7 litres Two speeds can be selected: 140 or 285 rpm for the...
Used to compact cement mortar prisms 40x40x160 mm in the three gang mould. The apparatus consists of a table holding the mould, seated on a rotating cam driven at 60 revolutions per minute.The jolting group is connected to the table by bayonet joints for quick checking of the weights. The drop heigh...
Three gang verified moulf for 40.1x40x160 mm prisms. Identical in shape to model E102, but manufactured from heavy duty steel with hardness of inside walls over HV 500 (EN196/1 Specifications recommend hardness HV 400). This high hardness value keeps the mould within the tolerances requested by...
Compression / flexural testing machine with dual measuring range 250/15 kN, motorized with Servo-Plus progress control unit (fully automatic model) for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber....
Similar to model E130, but manufactured with oversized components, treatments and extremely accurate couplings for intensive use in heavy conditions.Motor feeded by an inverter to grant the keeping of 60 revolutions per minute in any condition.Power supply: s30V 1ph 50-60 Hz 500WWeight: 93 kg approx...
Water bath having a capacity of 200 litres. Internal dimensions: 900x600x360 mm Overall dimensions: 1050x680x430 mm Power supply: 230V 1ph 50-60Hz 4000W Weight: 55 kg approx.
Compression / flexural testing machine with dual measuring range 250/15 kN manual, 2 gauges for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber. The two ranges can be used alternatively and are suitable to...
WATER BATHS FOR CEMENT CURING AND FOR GENERAL LABORATORY PURPOSE. This model can hold over 60 specimens 40.1x40x160 mm Internal dimensions: 510x350x230 mm Overall dimensions: 680x420x420 mm Power supply: 230V 1ph 50/60Hz 1200W Weight: 28 kg approx.
Compression and flexural testing machine High Performance with dual testing chamber and two indipendent measuring ranges 300 kN AND 15 kN* with load cells, Servo-plus progress control unit. This testing machine is equipped with two load chambers with two independent measuring ranges. It is suitable ...
Compression device to test mortar portion of prisms 40.1x40x160 mm broken previously in flexure. To be used with a concrete compression machine foreseen of low capacity measuring range and suitable distance pieces (mod. C097-01, C097-02) or with a flexural frame. Dimensions: Ø 150xh182 mm.Wei...
C093-03N C089-21N E159-01N C076 C079-05D C089-04A C089-15 E161-02N C041A C024D E159N C070D C079-06A C090-03N C089-19A C058-02 C089 C021 C089-22A E160-01N C066 C051 C089-17D C090-07N C058-04D C052 C091-02N C089-07 C079-04 C053 C079-05N C039 E161-03N C055N C089-04N C077N C091-03N C089B C058-05N C089-21D C090-07A C091-02D C075 C074 C025A C040N C079-06N C088N C089-02D E161N C091-01 C055D C089-17N C068 C058 C089-08D C079-03 C091-03A C089-10N C022 C090-06N C036 C056N C086-02N C090-01 C058-05A C087-01N C088-01N E161-01N C093-02N C077D C086-03N C069 C079-01 C089-16 C087N C090-06D C037 C089-19N C073 C090-02D C071A C038 C089-01B C090-02N C090 C089-10A C088-10N C089-22N C058-04N C089-08N C079-02 C058-01 C067 C058-03 C071N C078A C056A C089-06 C078N C089-02N C020 C054 C023 C070N C093-02D C090-03A C041N C089-01 C093-03A C040D E160NTSoftware UTM2 (Universal Testing Machine 2) for remote control of the testing machine through PC for Cyber and Servo-plus progress models. The licenses for compression and flexure tests on concrete and mortar specimens are also included in this license. For Digitec and Autotec control systems the li...
E161-02N C090-03N E161-03N C089-04N C058-05N C079-06N C088-11N E161N C025N C089-10N C056N C087-01N C088-01N E161-01N C086-03N C089-19N C088-10N C089-22N C071N C078N C041N E183NCompression machine 300 kN, 1 gauge for cement and mortar specimens, bricks, rocks, refractories etc. Designed to perform compression tests on portions of prism 40.1x40x160 mm, cubes side 40, 50, 70, 100 mm and 2”; cores with max. height of 180 mm, by using the suitable compression devic...
Compression machine 500 kN motorized with Digitec control unit for cement and mortar specimens, bricks, rocks, refractories etc. Designed to perform compression tests on portions of prism 40.1x40x160 mm, cubes side 40, 50, 70, 100 mm and 2”; cores with max. height of 180 mm, by using the suita...
Compression testing machine 250 kN, motorized with digitec control unit for cement and mortar specimens, bricks, rocks, refractories etc. Designed to perform compression tests on portions of prism 40.1x40x160 mm, cubes side 40, 50, 70, 100 mm and 2”; cores with max. height of 180 mm, by using ...
Cement compression machine 250 kN motorized with Autotec control unit for cement and mortar specimens, bricks, rocks, refractories etc. Designed to perform compression tests on portions of prism 40,1x40x160 mm, cubes side 40, 50, 70, 100 mm and 2”; cores with max. height of 180 mm, by using th...
Cement compression machine 500 kN motorized with Autotec control unit for cement and mortar specimens, bricks, rocks, refractories etc. Designed to perform compression tests on portions of prism 40,1x40x160 mm, cubes side 40, 50, 70, 100 mm and 2”; cores with max. height of 180 mm, by using th...
Compression machine 500 kN with Cyber-Plus progress control unit (semi-automatic model). Designed to perform compression tests on portions of prism 40,1x40x160 mm, cubes side 40, 50, 70, 100 mm and 2”; cores with max. height of 180 mm, by using the suitable compression devices (accessories mod...
Compression machine 250 kN with Servo-Plus progress control unit (fully automatic model). Designed to perform compression tests on portions of prism 40.1x40x160 mm, cubes side 40, 50, 70, 100 mm and 2”; cores with max. height of 180 mm, by using the suitable compression devices (accessories mo...
Compression machine 250 kN with Cyber-Plus progress control unit (semi-automatic model). Designed to perform compression tests on portions of prism 40.1x40x160 mm, cubes side 40, 50, 70, 100 mm and 2”; cores with max. height of 180 mm, by using the suitable compression devices (accessories mod...
Compression / flexural testing machine with dual measuring range 300/50 kN manual, 2 gauges for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber. The two ranges can be used alternatively and are suitable to...
Compression / flexural testing machine with dual measuring range 300/50 kN manual, 2 gauges for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber. The two ranges can be used alternatively and are suitable to...
Compression / flexural testing machine with dual measuring range 500/15 kN manual, 2 gauges for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber. The two ranges can be used alternatively and are suitable to...
Compression / flexural testing machine with dual measuring range 250/15 kN manual, 2 gauges for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber. The two ranges can be used alternatively and are suitable to...
Compression / flexural testing machine with dual measuring range 500/15 kN manual, 2 gauges for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber. The two ranges can be used alternatively and are suitable to...
Compression / flexural testing machine with dual measuring range 500/15 kN, motorized with Cyber-Plus progress control unit (semi-automatic model) for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber. The t...
Compression / flexural testing machine with dual measuring range 250/15 kN, motorized with Cyber-Plus progress control unit (semi-automatic model) for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber. ...
Compression and flexural testing machine with dual measuring range 500/15 kN, motorized with Servo-Plus progress control unit (fully automatic system) for cement and mortar specimens, bricks, rocks, refractories etc. This testing machine foresees a dual measuring range in the same testing chamber. T...
Compression and flexural testing machine High performance with dual testing chamber and two indipendent measuring ranges 300 kN and 15 kN with load cells, cyber-plus progress control unit. This testing machine is equipped with two load chambers with two independent measuring ranges. It is suitable t...
Upper bearer is seat ball assembled. The distance between lower bearers is 100 mm and one of them has a spherical seat. Cadmium plated for rust protection.Dimensions: 160x153xh185 mmWeight: 11 Kg Three models are available, according to different Standards: E172-01: Flexure device for 40.1x40x160 m...
C093-03N E156 C090-03N E160-01N C090-07N C091-02N E160-01D E161-03N C091-03N C090-07A C091-02D E160N E160D C091-01 E181N C091-03A C090-06N C090-01 E161-01N C093-02N E161-03A C090-06D C090-02D C090-02N C090 E152 E161-01A C093-02D C090-03A C093-03A E183N E160NTBasically similar to mod. E093N, but not equipped with automatic program, sand dispenser and safety door.Two speeds can be selected. Supplied complete with stainless steel bowl, but without beater which has to be ordered separately.This mixer can be supplied only to extra CE markets.Dimensions:...
Mortar mixer, 5 litre capacity, similar to mod. E094N but complete with sand dispenser and safety door to CE Safety Directive. Two speeds can be selected. Supplied complete with stainless steel bowl, but without beater which has to be ordered separately.Dimensions: 450x480x760 mmWeight: 45 Kg a...
Compression/flexural testing machine with dual load cell measuring range. This testing machine foresees a dual measuring range with dual load cells in the same testing chamber. The two ranges can be used alternatively and are suitable to perform: Flexural tests on cement prisms 40.1x40x160 mm, sel...
Unimec 300 is an electromechanical universal testing machine suitable to test different kinds of construction materials such as concrete, mortar, steel, soil, asphalt, bitumen and also plastic, rubber, wood and others. It can work in two directions, allowing to perform tests both in tension and in c...
A cabinet designed for all research and control laboratories to perform cold and hot temperature measurements at controlled humidity conditions, any freezing/thawing tests and accelerated curing tests. Used to cure concrete and cement specimens and analyze the behaviour of freezing and thawing of ag...
Same as model E094N but equipped also with a sand dispenser.
Same as E102 but made of plastic.
Suitable for curing large quantities of cement, mortar and concrete specimens at controlled temperature and humidity. Temperature range: +18 °C to +30 °C with accuracy ± 1 °C Humidity range: 95% to saturation Useful capacity: 540 litres Fully stainless steel made with insulation ...
No results