AUTOMATIC PROGRAMMABLE COMPUTERIZED MORTAR MIXER HIGH-PERFORMANCEMixmatic has an extremely sturdy fabricated frame for an intensive laboratory use. Complete with stainless steel polished beater, mixing bowl and automatic sand dispensers having dimensions and geometry to grant the correct sand insert...
Designed to test concrete mortar for dynamic workability and also to ensure optimum proportioning of mortar constituents (sand, water, cement, as well as cement/sand and water/cement ratios) compatible with given application. Suitable also for checking possible improvement when admixing a plastifier...
MASONRY CEMENT AND BUILDING LIME CONSISTENCYUsed to determine the consistency of fresh mortar, lime and masonry cement.The base is foreseen of a device to locate the test cup. The height of the drop can be accurately adjusted to 100 mm.Supplied complete with test cup and tamper, both anodized alumin...
Identical to mod. E027, but with vessel having 0.75 litre capacity, conforming to EN 413-2 Specification.
Used for determining the water retention of masonry cements. Made from rigid plastic inside diameter 100 +/-1 mm, inside height 25 +/- 1 mm Weight: 300 g approx
Cable RS232 to connect the digital unit to PC.
This very robust mixer is expressly designed for the efficient mixing of cement pastes and mortar, with four automatic sequences of mixing cycle, in compliance with: EN 196-1, EN 196-3, EN 480-1 Specifications.Bowl capacity is 4.7 litres Two speeds can be selected: 140 or 285 rpm for the...
Basically similar to mod. E093N, but not equipped with automatic program, sand dispenser and safety door.Two speeds can be selected. Supplied complete with stainless steel bowl, but without beater which has to be ordered separately.This mixer can be supplied only to extra CE markets.Dimensions:...
Mortar mixer, 5 litre capacity, similar to mod. E094N but complete with sand dispenser and safety door to CE Safety Directive. Two speeds can be selected. Supplied complete with stainless steel bowl, but without beater which has to be ordered separately.Dimensions: 450x480x760 mmWeight: 45 Kg a...
Identical to mod. E028, but with vessel having 0.75 litre capacity, conforming to EN 413-2 Specification.
Designed to determine the air content in cement mortar, cement paste and lime mortar. Made from cast aluminium, the test pot one litre capacity and the upper part are air-tight sealed by means of two quick action spring clamps. The whole is connected to a dial gauge directly indicating the air ...
Same as mod. E027, but with incorporated an electric mini-compressor giving air pressure and keeping it constant all along the test. Power supply: 110-230V 1ph 50-60 Hz Two different capacities are available as follows: E028: 1 litres capacity E028-02: 0.75 capacity, conforming to EN 413-2 Specific...
Same as model E094N but equipped also with a sand dispenser.
No results