Available in three models: C107-09: for Ø 100x200 mm cylinders (2 pieces) C107-10: for Ø 150x300 mm and 6x12" cylinders (2 pieces) C107-12: for Ø 160x320 mm cylinders (2 pieces) The system is not applicable for expected strength lower than 10 Mpa. Note:The capping retainers ca...
NEOPRENE PADS (couple) 60 shore for dia. 160x320 mm cylinders Used for compression tests on concrete cylinder specimens, as an alternative method to the sulphur capping and grinding machine. Two steel capping retainers are applied on the two flat surfaces of the cylinder.Two neoprene pads are ...
Neoprene pads (couple) 70 shore for dia. 160x320mm cylinders Used for compression tests on concrete cylinder specimens, as an alternative method to the sulphur capping and grinding machine.Two steel capping retainers are applied on the two flat surfaces of the cylinder. Two neoprene pads are put bet...
C041A C024D C021 C039 C024N C025A C040N C025N C022 C036 C037 C038 C020 C023 C041N C040DDiaphragm pump. 230V 1ph 50Hz
Capping retainers (couple) for Ø 150x300mm and 6'' x12'' cylinders. Used for compression tests on concrete cylinder specimens, as an alternative method to the sulphur capping and grinding machine.Two steel capping retainers are applied on the two flat surfaces of the cylinder.Two neoprene pad...
C076 C079-05D C089-04A C041A C024D C070D C079-06A C058-02 C089 C021 C066 C051 C052 C089-07 C079-04 C053 C079-05N C039 C024N C055N C089-04N C077N C075 C074 C025A C040N C079-06N C089-02D C055D C068 C025N C089-08D C079-03 C089-10N C022 C036 C056N C077D C069 C079-01 C037 C073 C071A C038 C089-10A C089-08N C079-02 C067 C071N C078A C056A C089-06 C078N C089-02N C020 C054 C023 C070N C041N C089-01 C040DA couple of capping retainers used for compression tests on concrete cylinder specimens Ø 160x320 mm, as an alternative method to the sulphur capping and grinding machine.Two steel capping retainers are applied on the two flat surfaces of the cylinder.Two neoprene pads are put between them, f...
C041A C024D C070D C021 C066 C051 C052 C053 C039 C024N C055N C025A C040N C055D C068 C025N C022 C036 C056N C069 C037 C071A C038 C067 C071N C056A C020 C054 C023 C070N C041N C040DThe neoprene pads are available in two models: 60 shore hardness pads for expected strength from 10 to 48 MPa 70 shore hardness pads for expected strength over 48 MPa The system is not applicable for expected strength lower than 10 Mpa. Models: C107-18: Neoprene pads (couple) 60 shore...
Testing chamber with vertical clearance of 376 mm, complete with distance piece 40 mm high, that allows to test cylinders Ø150x300 mm and Ø160x320 mm with capping retainers.
Upper compression platen and spherical seat for tests on cylinder specimens dia. 100x200, 150x300, 160x320 mm and 4”x 8”, 6”x 12” to fix on the testing machine, in replacement of the standard platen +seat to obtain an increased vertical clearance of the testing chamber and to...
C076 C079-05D C089-04A C070D C079-06A C089 C066 C089-07 C079-04 C079-05N C055N C089-04N C075 C074 C079-06N C089-02D C068 C089-08D C079-03 C089-10N C077D C069 C079-01 C073 C071A C089-10A C089-08N C079-02 C067 C071N C078A C089-06 C078N C089-02N C070N C089-01No results