Split CBR mould with collar and peforated base: dia 150 mm x 120 mm height
Tripod (dial gauge support)
Automatic, programmable PROCTOR / CBR Compactor with microprocessor, “high technology” Designed to compact Proctor and CBR specimens, it ensures an extremely uniform compaction degree, granting reliable and repeatable test results. The microprocessor software allows to select and perform...
CBR motorized frame Part of S211 KIT
SOFTWARE UTM2 (Universal Testing Machine 2)Developed for the management and the remote control through PC of Matest testing machines.Licence for CBR Test
B044M-SET S215AUsed for a smooth and rapid extrusion of soil samples from tubes also of thin walls with minimum disturbance. The unit extrudes samples from Ø 35 up to 150 mm (external diameter 160 mm) with max. stroke of 900 mm.The hydraulic piston is equipped of speed adjuster and can be stopped in any exc...
CBR mould complete with collar and perforated base: diameter 150 mm x 120 mm height
S199CBR loading machine, hand operated, field model The load is applied through a mechanical jack with handwheel. The upper beam can be adjusted in height. The S210KIT machine comprises:S221 Conversion frameS221-01 Mechanical jack 50 kN capacity (provided with its support)S370-10 Load ring 50 kN capacit...
CBR loading machine, hand-operated, laboratory model Load is applied through a mechanical jack and handwheel. The upper beam can be adjusted in height.Foreseen of fast approach device of the base plate. The S209 KIT CBR machine comprises:S209-01 CBR laboratory frameS212-01 CBR penetration pistonS370...
Filter screen, stainless steel, 149 mm mesh 0.150 mm (ASTM n° 100)
Annular surcharge weight 2000 g
Ø 50 mm fall height 457.2 mm, weight 4.54 kg
Ø 150 mm
600x400x400 mm
Used to extrude samples having diameters of 4”, 6”, 100 mm, 150 mm. It can therefore extrude CBR, Marshall and Proctor specimens. The extruder is actuated by a 50 kN hydraulic jack, having ram travel of 190 mm + 170 mm screw.Supplied complete with adaptors.Dimensions: Ø 300x500 m...
Solid base plate for CBR mould.
Perforated base plate for CBR mould.
Spacer disc with “T” handle: Ø 149.5 mm x 36 mm height
Perforated (sweel) plate with adjustable stem.
Split surcharge weight 2000 g
Hand-operated hydraulic jack, 30 kN capacity. Suitable for the extrusionof 4” diameter specimens from the mould. Dimensions: Ø 200x400 (h) mm.Weight: 20 kg approx.
Unimec 300 is an electromechanical universal testing machine suitable to test different kinds of construction materials such as concrete, mortar, steel, soil, asphalt, bitumen and also plastic, rubber, wood and others. It can work in two directions, allowing to perform tests both in tension and in c...
CBR loading machine motorized, 50 kNMotorized speed rate 1.27 mm/min Load is applied through a screw jack driven by an electric motor at a constant penetration rate of 1.27 mm/min achieved by a built-in gearbox and assured also under load.The upper beam can be adjusted in height.Foreseen fast approa...
The frame is provided of three fixed speed ranges, easily selectable with a frequency changer (inverter) activated by an electric switch: 1.00 mm/min. for CBR tests (as Australian and old BS Standards) 1.27 mm/min. for CBR tests 50.8 mm/min for Marshall tests. Supplied without lo...
No results