High-end laboratory oven with forced ventilation: Power supply: 230V 50Hz 1ph Inside dimensions: 550x400x580 mm Outside dimensions: 750x780x880 mm Capacity: 120 litres Doors: n.1 Wattage: 2.2 kW Weight: 70 kg
Laboratory oven with forced ventilation: Power supply: 230V 50-60Hz 1ph Capacity: 100 litres Inside dimensions: 400x420x600 mm Outside dimensions: 700x515x910 mm Doors: n.1 Wattage: 1250W Weight: 45 kg
Laboratory oven with forced ventilation: Power supply: 230V 50-60Hz 1ph Capacity: 220 litres Inside dimensions: 600x610x600 mm Outside dimensions: 900x725x910 mm Doors: n.1 Wattage: 2050W Weight: 70 kg approx.
Laboratory oven with forced ventilation: Power supply: 230V 50-60Hz 1ph Capacity: 440 litres Inside dimensions: 900x700x700 mm Outside dimensions: 1250x760x1000 mm Doors: n.2 Wattage: 3700W Weight: 95 kg
High end laboratory oven with forced ventilation: Power supply: 230V 50Hz 1ph Inside dimensions: 730x500x620 mm Outside dimensions: 930x880x915 mm Capacity: 220 litres Doors: n.1 Wattage: 4 kW Weight: 102 kg
Laboratory oven with forced ventilation: Power supply: 230V 50-60Hz 1ph Capacity: 750 litres Inside dimensions: 900x640x1300 mm Outside dimensions: 1250x700x1600 mm Doors: n.2 Wattage: 4950W Weight: 140 kg
High end laboratory oven with forced ventilation: Capacity: 420 litres Doors: n°2 Wattage: 6.2 kW Weight: 155 kg Power supply: 400V 50Hz 3ph Inside dimensions: 1000x469x863 mm Outside dimensions: 1248x890x1227 mm
Moisture condition value (MCV) and chalk crushing value (CCV) This apparatus is used to measure the minimum comparative effort required to produce near full compaction of a soil, and the rate at which a sample of chalk lumps are crushed.The unit can be used to classify chalk as a fill material with ...
This mould, vertically split on one side, foreseen of clamp attachment to the base plate, plated against corrosion, is utilized for determining the degree of compaction of bituminous pavaments, for quality control purpose.Weight:12 Kg
Used for a smooth and rapid extrusion of soil samples from tubes also of thin walls with minimum disturbance. The unit extrudes samples from Ø 35 up to 150 mm (external diameter 160 mm) with max. stroke of 900 mm.The hydraulic piston is equipped of speed adjuster and can be stopped in any exc...
It provides an alternative method for the compaction of soil samples in the determination of dry density/moisture content relation (called Proctor), unconfined compressive strength of stabilized soils and CBR tests. This hammer is also used for the compaction of asphalt in the percentage r...
CBR loading machine, hand operated, field model The load is applied through a mechanical jack with handwheel. The upper beam can be adjusted in height. The S210KIT machine comprises:S221 Conversion frameS221-01 Mechanical jack 50 kN capacity (provided with its support)S370-10 Load ring 50 kN capacit...
Automatic, programmable PROCTOR / CBR Compactor with microprocessor, “high technology” Designed to compact Proctor and CBR specimens, it ensures an extremely uniform compaction degree, granting reliable and repeatable test results. The microprocessor software allows to select and perform...
TEST GAUGE, to check the condition of the cone point 60° angle.
S165-01KIT S165 KIT S165-02 KIT S166 KITUsed to extrude samples having diameters of 4”, 6”, 100 mm, 150 mm. It can therefore extrude CBR, Marshall and Proctor specimens. The extruder is actuated by a 50 kN hydraulic jack, having ram travel of 190 mm + 170 mm screw.Supplied complete with adaptors.Dimensions: Ø 300x500 m...
TEST CONE 60°angle and 60g weight (liquid limit and shear strength tests).
S165-01KIT S165 KIT S165-02 KIT S166 KITCBR mould complete with collar and perforated base: Dia. 152 mm x 127 mm height
S199Filter screen, stainless steel, 149 mm mesh 0.150 mm (ASTM n° 100)
Hand-operated hydraulic jack, 30 kN capacity. Suitable for the extrusionof 4” diameter specimens from the mould. Dimensions: Ø 200x400 (h) mm.Weight: 20 kg approx.
Tripod (dial gauge support)
Perforated (sweel) plate with adjustable steam.
Annular surcharge weight 2000 g
ASTM, NF, BS
Ø 50 mm fall height 457.2 mm, weight 4.54 kg
Ø 150 mm
600x400x400 mm
Solid base plate for CBR mould.
Perforated base plate for CBR mould.
Spacer disc with “T” handle: Ø 150 mm x 50 mm height
Split surcharge weight 2000 g
No results