Manufacturer of the widest range of material testing equipment
<< back
foto della sezione

Concrete


COMPRESSION MACHINES 2000 kN, TO TEST BLOCKS, CUBES AND CYLINDERS  
Standard: EN 772-1 - ASTM C39 - ASTM E447 - AASHTO T22 - UNI 6686 PART 1 AND 2 - NF P18-411 - BS 1610 - BS 6073 - UNE 83304 -  
Add to cart   Show cart

COMPRESSION TESTING MACHINES 2000 kN CAPACITY  to test blocks max. 500x300 mm, cubes up to 300 mm side and cylinders up to dia. 160x320 mm.

TECHNICAL SPECIFICATIONS:
- Max. vertical daylight: 336 mm
- Compression platens 510x320x55 mm
- Gauges dia. 250 mm with specific resistance scales for cubes 150 mm and cylinders dia. 150 and 160 mm
- Gauges divisions: 2000 kN div. 5 kN 600 kN div. 2 kN
- Hydraulic device to stop the piston’s stroke at its max excursion to avoid pumping the piston out of the cylinder
- Calibration accuracy: Grade 1.0
- Max. ram travel 55 mm approx.
- Power supply (motorized models): 230 V 1 ph 50 Hz 750 W
- Dimensions: 870x600x1400 mm
- Weight: 850÷900 kg
Other products
COD. DESCRIPTION Spares
C073 CONCRETE COMPRESSION MACHINE 2000kN, HAND OPERATED, 1 GAUGE
C074 CONCRETE COMPRESSION MACHINE 2000 kN HAND OPERATED, 2 GAUGES
C075 CONCRETE COMPRESSION MACHINE 2000 kN MOTORIZED, 1 GAUGE
C076 CONCRETE COMPRESSION MACHINE 2000 kN MOTORIZED, 2 GAUGES
C077D CONCRETE COMPRESSION MACHINE 2000 kN MOTORIZED, DIGITEC
C078A CONCRETE COMPRESSION MACHINE 2000 kN MOTORIZED, AUTOTEC
Accessories
COD. DESCRIPTION
C109-10 SOFTWARE for compression test, digitec machine
C109-11 SOFTWARE for flexural tests on concrete beams, digital machines
C109-12 SOFTWARE for splitting tensile test, digital machines
C111-08 SLOTTED DISTANCE PIECE 126 mm HIGH
C111-22 DISTANCE PIECE 50 mm high
C111-23 SLOTTED DISTANCE PIECE 50 mm HIGH
C123 SERVONET SOFTWARE for PC remote controll
C127N GRAPHIC PRINTER
C111-04 DISTANCE PIECE 126 mm high for cubes 200 mm side
C111-05 DISTANCE PIECES 126 + 50 mm for cubes 150, 200 mm side
C111-06 DISTANCE PIECES 126 + 50 + 50 mm for cubes 100, 150, 200 mm side
C121-01 SAFETY GUARDS FOR MACHINES WITH BLOCK PLATENS 2000 kN
C105 DEVICE WITH CENTRAL SCREW
C127-11 THERMO-PAPER roll for printer
C111-31 DISTANCE PIECE 20 mm high
C121-51 STOP SWITCH on safety guard
C115-01 TWO WAY HYDRAULIC VALVE
C097-05 CLASS 1 STARTING FROM 1% OF THE FULL RANGE
C107-10 CAPPING RETAINERS (couple) for dia. 150x300 mm and 6''x12'' cylinders
C107-20 NEOPRENE PADS (couple) 60 shore A for dia. 150x300mm and 6''x12'' cylinders
C100 SPLITTING TENSILE TEST DEVICE for cylinders
C103 SPLITTING TENSILE TEST DEVICE for cubes
C106 FLEXURAL TEST DEVICE FOR TWO POINTS AND POINT TESTS
E170 COMPRESSION DEVICE FOR MORTAR PRISM 40,1x40x160 mm
C126 BENCH TO HOLD THE COMPRESSION MACHINE
C097-01 DUAL LOW CAPACITY DIGITAL RANGE 0-250 kN
C097-02 DUAL LOW CAPACITY DIGITAL RANGE 0-300kN, complete with ''strain gage load cell''
C110-30 UPPER COMPRESSION PLATEN + SPHERICAL SEAT
C111-27 SLOTTED DISTANCE PIECE 20 mm HIGH
C111-28 SLOTTED DISTANCE PIECE 76 mm HIGH
C103-01 SPLITTING TENSILE TEST DEVICE for block pavers
C111-50 DISTANCE PIECE
C112-05 KIT OF 4 HANDLES TO LIFT THE LOWER PLATEN


Sales conditions Site map
 
Untitled Page