1. Home
  2. ASFALTO
  3. PAVETEST - EQUIPOS ESTÁTICOS Y DINÁMICOS
  4. AMPT - Asphalt Mixture Performance Tester
  5. AMPT | SPT - Asphalt mixture performance tester
Prueba Norma Productos
ASFALTO
asphalt mixture performance tester asphalt mixture performance tester

B200L AMPT | SPT - Asphalt mixture performance tester

( Asphalt )
  • AASHTO T400
  • AASHTO T411
  • AASHTO TP132
  • AASHTO TP134
  • AASHTO T378
  • AASHTO TP107

Compact, fully self-contained, precision-engineered unit

The Pavetest AMPT is a servo-hydraulically controlled testing machine designed to perform the three asphalt tests developed under NCHRP Projects 9-19 and 9-29: Dynamic Modulus, Flow Number and Flow Time. It is also the prescribed equipment in AASHTO T400, AASHTO T411, AASHTO TP132, AASHTO TP134 and AASHTO T378 Standard Method Test for determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) using the Asphalt Mixture Performance Tester (AMPT).

In addition, the Pavetest AMPT can also perform AASHTO TP107 for determining the Damage Characteristic Curve and Fatigue Analysis Parameters of Asphalt Mixtures in the AMPT, Indirect Tensile Dynamic Modulus, Incremental Repeated Load Permanent Deformation, Semi-circular bend, and Overlay Testing of Asphalt Mixtures.
The Pavetest AMPT is underpinned by Pavetest’s leading-edge CDAS digital controller, TestLab software, and a full complement of accessories, hardware, and software, which work in perfect unison.

The machine includes:

  • 8 Channel Control and Data Acquisition System (CDAS2) & TestLab software
  • 30 mm Actuator LVDT
  • Load cell (± 20 kN)
  • Pressure transducer (± 300 kPa)
  • Temperature transducer (-80 °C to + 80 °C)
  • Magnetically mounted on-specimen LVDT (2 mm) (3 pieces)
  • 105 mm bottom-loading platen
  • 105 mm top-loading platen

It requires pressurised air, with a minimum of 4 bars (not included).

Pedir información
  • B201-52
    5 minute, two part epoxy 24 ml
  • B201-53
    Rubber membrane 0.3 mm thickness, Ø 100 mm (pack of 10)
  • S311-03
    Sealing ring 100x200 mm
  • B253-53
    Gauge point, 24 needed pieces
  • B200-10
    Latex membrane material cut in Ø 100 mm discs
  • B200-09
    Spacer for 130 mm specimen height
  • B200-20
    Bottom Loading Platen Ø 70x140 mm
  • B200-21
    Top Loading Platen Ø 70x140 mm
  • B202-05
    Extension for Ø 75 mm specimen for B202
  • B202-06
    Spacer for 120 mm height specimens, for B202
  • B270-19
    Membrane stretcher for asphalt specimen Ø 70 mm

Load capacity: 19kN (Static) - 17kN (Dynamic)
Actuator stroke: 30 mm
Specimen size: 100 mm (diameter) x 150 mm (h)
Temperature range: -10 °C to 70 °C *(B200L)
Confining pressure: 0 to 225 kPa
Noise level: Less than 70 dB at 2 m
Power Supply: 230V 50-60Hz 1ph 3.5kW
Dimensions: 1510(h) x 680(d) x 1200(w) mm
1870(h) x 680(d) x 1200(w) mm with raised cell
Weight: 330 kg approx. (including oil)

 

B204-KIT Overlay kit according to ASTM WK26816. Comprises:

- B204-01 Overlay jig
- B204-02 Pair of Overlay Tester (OT) specimen plates
- B204-03 OT specimen preparation jig according to ASTM WK26816

B204-01-KIT Overlay kit according to TEX-248-F. Comprises:

- B204-01 Overlay jig
- B204-02 Pair of overlay tester (OT) specimen plates
- B204-13 OT specimen preparation jig according to TEX-248-F

B207-01-KIT AMPT Indirect Tensile (IDT) kit. Comprises:

- B207-01 AMPT IDT Jig
- B253-01 LVDT mounting Jig
- B253-03 Gauge point template (150 mm specimen)
- B290-04N AMPT Miniature LVDT (1 mm) (4 pieces)
- B253-53 Gauge point (32 pieces)
- B207-02 Cable gland (4 pieces)

B254-02-KIT AASHTO TP393 | ASTM D8044 SCB testing kit. Comprises:

- B208 SCB frame
- B254-10 Roller support
- B254-02 Springs and roller
- B254-03 Upgrade for AASHTO TP124 Method A

B253-01-KIT Combined IDT/SCB testing kit. Comprises:

- B253 Indirect tensile modulus, creep compliance and strength using on-specimen transducers
- B253-01 LVDT mounting jig
- B253-03 Gauge point template (150 mm specimen)
- B290-04N AMPT miniature LVDT (1 mm) (4 pieces)
- B253-53 Gauge point (32 pieces)
- B207-02 Cable gland (4 pieces)
- B254-10 Roller support
- B254-02 Springs and roller
- B254-03 Upgrade for AASHTO T393 Method A (2 pieces)

  • Thermoelectric (TE) Heating/Cooling More reliable and environmentally friendly than mechanical refrigeration & heating elements.
  • Magnetically mounted on-specimen transducer system, based on loose core LVDTs or optional epsilon extensometers.
  • Gauge point fixing jig facilitates gluing gauge points and the (top and bottom) platens for proposed AMPT
  • Direct Tension Cyclic Fatigue (S-VECD) Test.
  • Dynamic Verification Device.
  • DynafloTM HPS provides dynamic speed control of the pump motor ensuring quiet operation.
  • Optional built-in, silent, air compressor with associated air preparation equipment.