1. Home
  2. CONCRETO
  3. SISTEMAS DE CONTROL
  4. Digitec
  5. Digitec - Two channels control unit, semi-automatic
Prueba Norma Productos
CONCRETO
Load measurement system Load measurement system

C108N Digitec - Two channels control unit, semi-automatic

( Concrete )

Digitec is a digital system with a computerized graphic display and two channels for load sensors. It allows to perform compression, flexural and splitting tests both on concrete and mortar.
Digitec acquires, displays, processes, prints and saves test data and reports. It can be used also for retrofitting compression and flexural machines from other brands.

Suitable to upgrade or complete your concrete or mortar compression and flexure testing machines (also from other manufacturers).
Supplied with an RS232 connection, the system can manage and process the data in compliance with EN 12390 Specification and the different International Standards, for the following tests:

  • Compression on concrete
  • Flexure on concrete
  • Splitting on concrete cubes and cylinders
  • Compression and flexure on mortar

Menu
The display shows the date and time, currently applied load and single load, latest affected tests, pace rate control, rapid commands functions, configuration in use, analogue channel and activated alarm.

Power supply: 230V 1ph 50/60Hz
Dimensions: 260x250x210 mm
Weight: 4 kg

 

Pedir información
Non sei loggato per vedere i manuali Entra
  • 2 analogue-digital channels accepting sensors, transducers or load cells at 2 mV/V, allows the connection to two different compression/flexure frames.
  • Simple and immediate parameters set up and test execution, menu driven interface.
  • Rapid approaching, touching on and breaking of the specimen under direct pump control (Autotec C098N)
  • Automatic control of the pace rate (Autotec C098N)
  • Continue load display.
  • Breaking load detection.
  • Automatic elaboration of the specific resistance value. 
  • Permanent file up to 1000 tests and file of 100 different types of specimens.
  • Graphic display with high resolution: 192x64 pixels.
  • Selectable measuring force: kN, lb
  • Languages: English, French, German, Spanish, Italian, Polish, Czech, Turkish.
  • Class 1 starting from 10% of maximum value, on request from 1% of maximum value. - ± 0.5% load accuracy. 
  • 2 analogue-digital channels accepting pressure transducers or load cells at 2 mV/V.
  • Simple and immediate parameters set up and test execution, menu-driven interface.
  • Rapid approaching, touching on and breaking of the specimen under direct pump control (Autotec C098N)
  • Automatic control of the pace rate (Autotec C098N)
  • Continue load display.
  • Breaking load detection.
  • The acquisition and data processing system is 24-bit, and the effective resolution is 17-bit.
  • The operator interface comprises 5 multi-function pushbuttons; and function icons shown on the display.
  • Electronic and mechanical safety means such as maximum calibration threshold, thermal protection of the motor and other settable alarms.
  • Possibility of personalization for special-sized samples.
  • RS232 interface: it allows to transfer of the test results directly to the PC (via serial emulator) or the remote control of the system through the UTM2 software (accessory).
  • Automatic elaboration of the specific resistance value.
  • Permanent file up to 1000 tests and file of 100 different types of specimens.
  • Graphic display with high resolution: 192x64 pixels.
  • Selectable measuring force: kN, lb
  • Languages: English, French, German, Spanish, Italian, Polish, Czech, Turkish.
  • Class 1 starts from 10% of the full scale, according to ISO 7500-1 (on request also from 1% of the full scale).