1. Home
  2. Асфальт
  3. ЛАБОРАТОРНЫЙ АНАЛИЗ
  4. Сбора и Обработка Данных
  5. Cyber-Plus 8 Progress Touch-Screen Data Acquisition
Испытание Стандарт Оборудование
Асфальт

B044M-SET Cyber-Plus 8 Progress Touch-Screen Data Acquisition

( Asphalt )

The Matest Cyber-Plus 8 Progress is an advanced control and data acquisition unit with 8 analog/digital channels, designed for high-precision testing of asphalt and soil specimens. Its colour touch-screen display shows real-time load and deformation values, with automatic safety switch-off when maximum load or deformation is reached.

Compatible with existing Matest machines and other load frames, including:

  • Marshall mechanical load frame (B042-KIT)
  • CBR/Marshall 3-speeds load frame (S213-05N)
  • CBR motorized loading machine (S211-KIT)

Supports tests according to EN, ASTM, CNR, NF, BS standards, including Marshall, CBR, indirect tensile, and unconfined compression tests. Supplied as B044M-SET, complete with 50 kN load cell, 50 mm linear displacement transducer, all accessories for mounting, and calibration certificate.

Запрос информации о продукте
Non sei loggato per vedere i manuali Entra

Hardware specifications:

  • 8 independent channels available for the load cells or potentiometrics transducers or stain gages for load, deformation or displacement measurements;
  • Stabilized power supply of the analogical channels: 5 Vcc and 3 Vcc;
  • Control frequency: up to 1 kHz;
  • Nominal resolution: 24 bit;
  • Sampling frequency: up to 2 kHz;
  • Safety discrete On/off output;
  • Graphic display colour touch-screen;
  • Time and calendar system.

Firmware specifications:

  • Instant display of the load measured by an exstensometric cell.
  • Instant display of the deformation measured by 4 linear displacement transducers.
  • Visualization of the graphic display of the test.
  • Visualization of date and time.
  • Semi-automatic configuration and calibration of all transducers connected.
  • 20 steps lining that can be set by the enduser.
  • Automatic correction of the axis origin for CBR/Marshall tests.
  • Setting of all the parameters for test: alarms, zero threshold, endtest percentage, calculation parameters.
  • Time/date and language selection (Italian, English, French, German, Spanish, Polish).
  • Unlimited file for each type of test
  • Symbols of pushbuttons functions
  • Informative messages (planning alarms, load cell and strain transducer setting, etc.)
  • Printing of the results on the incorporated thermal graphic printer (accessory C127N). Transfer and management via Ethernet of the filed data or real-time.