It is a reliable electronic device used to measure pore pressure. It requires a de-airing block. Every transducer must be connected to the automatic data acquisition system mod. S334 or mod. S301-05.
- Input voltage: 10 volts dc, Sensitivity range: 2 - 4 mV/V
- Accuracy: 0.15 fs
- Pressure connection: 0.25 BSP
- Protected against corrosive pore water pressure
- 2 metres cable and 5-pin plug included
MODELS:
Note: It is recommended to limit the extension cable to 10 meters to prevent noise interference.
