Applicable only to temperature and humidity controlled cabinets C313N, C313-01N.
Used for the determination of tensile adhesion strength for cementitious adhesives.
It is composed of two stainless steel vessels and a discharging
system for the water. The system allows to empty and fill the inner vessel with water without opening the climatic cabinet.
Inner vessel water level is limited by a sensor.
Filling and drainage of water are regulated by a valve positioned on
the bottom of both vessels.
Inner vessel volume is 150 l, while outer vessel volume is 170 l.
Water temperature range is from 10 °C to 40 °C, demineralized water must be used.
Temperature stability: ± 2 °C
Water pressure range is from 0.2 to 5 bar.
Flooding system can be installed also in C313 already supplied if returned in Matest factory.
System must work with no organic compounds.
