Specimen Preparation
Cutting
You are not logged in to view the manuals, Log in
- Motorized feed with automatic retraction of saw carriage.
- Electronic control unit with touch screen colour display, that runs like a standard PC based on Windows operating system
- Adjustable cutting speed; before, during and after cutting process.
- Slabs and prisms can be sawn safely and accurately without additional jigs and fixtures.
- Jigs also available for trimming 100 and/or 150mm diameter cylinders/cores.
- Facilitates cutting rectangular beams, trapezoidal prisms, overlay test specimens, semi-circular & wheel tracking specimens, and cylindrical specimens.
- Fixed alignment blocks accurately position the specimen for the most common finished dimensions.
- Simple reference spacer system allows precise preparation of beams without the need for measurement. i.e. 50 mm x 63.5 mm or 50 mm x 50mm.
- Other dimensions can be accommodated using integral ruler.
- Adjustable limit switches facilitates repetitive cutting with minimal saw carriage travel.
- Secure specimen clamping.
- Protective enclosure, with safety interlocks, combines clean operation with unparalleled operator safety.
- Dynamic breaking system stops saw blade rotation when power is switched off.
- One or two blade concept
- Blade Diameter(s): 650 mm or 700 mm
- Blade Speed 1,400rpm (50Hz) or 1,680rpm (60Hz)
- Adjustable cutting speed, min 40 mm/min max 200 mm/min
- Max Cutting Depth 200 mm (with 650 mm blade diameter) or 240 mm (with 700 mm blade diameter)
- Cores 100 or 150 mm diameter (38 mm or 200 mm diameter on request )
- Max Prism Length 700 mm
- Cooling water recirculation pump and tank included
- Net Weight 500 kg approx.
- Parallel (Dual blade) cutting distance: 38 mm to 160 mm at set distances
- Dimensions 2370 mm (L) x 1340 mm (D) x 1670 mm (H)
- Air Supply 600 kPa (for pneumatic clamping option)
- Power Supply:
- 400V 50Hz 3ph, 230V/220V 50Hz 3ph (B040M)
- 400V 60Hz 3ph (B040MX)
- 208V 60Hz 3ph (B040MZ)
