The equipment to perform tensile tests on threaded samples is composed of two cylindrical heads (one upper and one lower), which must be pulled using suitable tensile grips. The cylindrical heads fit the bowl and ring which allows for fixing the sample.
Machine model (load capacity) |
H001A 600 kN |
H001B 1000 kN |
H001BS 1000 kN |
H001CS 1500 kN |
H001DS 2000 kN |
Tensile cylindrical heads for threaded elements (to be used in conjunction with one or more of the following sets) |
H001A-43 (needs grips H001A-13) |
H001B-43 (needs grips H001B-14) |
H001B-43 (needs grips H001B-14) |
H001D-43 (needs grips H001C-13) |
H001D-43 (needs grips H001D-14) |
Complete set of bowls and rings with self-alignment for fine-type thread from M3 to M39. |
H001A-44F |
H001B-44F |
H001B-44F |
H001D-44F |
H001D-44F |
Complete set of bowls and rings with self-alignment for course-type thread from M3 to M39. |
H001A-44C |
H001B-44C |
H001B-44C |
H001D-44C |
H001D-44C |
Complete set of bowls and rings for fine-type thread from M3 to M39. |
H001A-46F |
H001B-46F |
H001B-46F |
H001D-46F |
H001D-46F |
Complete set of bowls and rings for course-type thread from M3 to M39. |
H001A-46C |
H001B-46C |
H001B-46C |
H001D-46C |
H001D-46C |
Complete set of sloped washers for threads from M3 to M39. (Needs either H001X-46F or H001X-46C) |
H001A-47 |
H001B-47 |
H001B-47 |
H001D-47 |
H001D-47 |