Vous n'êtes pas connecté pour consulter les manuels, Log in
- 2 analogue-digital channels accepting pressure transducers or load cells at 2 mV/V.
- Simple and immediate parameters set up and test execution, menu-driven interface.
- Rapid approaching, touching on and breaking of the specimen under direct pump control (Autotec C098N)
- Automatic control of the pace rate (Autotec C098N)
- Continue load display.
- Breaking load detection.
- The acquisition and data processing system is 24-bit, and the effective resolution is 17-bit.
- The operator interface comprises 5 multi-function pushbuttons; and function icons shown on the display.
- Electronic and mechanical safety means such as maximum calibration threshold, thermal protection of the motor and other settable alarms.
- Possibility of personalization for special-sized samples.
- RS232 interface: it allows to transfer of the test results directly to the PC (via serial emulator) or the remote control of the system through the UTM2 software (accessory).
- Automatic elaboration of the specific resistance value.
- Permanent file up to 1000 tests and file of 100 different types of specimens.
- Graphic display with high resolution: 192x64 pixels.
- Selectable measuring force: kN, lb
- Languages: English, French, German, Spanish, Italian, Polish, Czech, Turkish.
- Class 1 starts from 10% of the full scale, according to ISO 7500-1 (on request also from 1% of the full scale).
