Dynamic Modulus - E

B255-KIT Dynamic modulus comprises:

• B200-02 105 mm bottom loading platen
• B200-03 105 mm top loading platen
• B253-04 AASHTO T342 LVDT mounting jig (3 pieces)
• B290-06N LVDT (1 mm) (3 pieces)
• B253-05 Screwdriver hex bit with spherical head size 2 mm

Dynamic modulus on small specimens

To test Ø 38x(h)110 mm specimens with DTS-30, DTS-130, SmartPulse, the following items are required:

• B200-05 Bottom loading platen 38x110 mm specimens
• B200-06 Top loading platen for 38x110 mm specimens
• B253-04 AASHTO T342 LVDT mounting jig (3 pieces)
• B290-06N LVDT (1 mm) (3 pieces)
• B253-53 Gauge point (24 needed pieces)
• B253-05 Screwdriver hex bit with spherical head size 2 mm
• B202 Gauge point fixing jig
• B202-02 Spacer for 110 mm specimen height to be used with gauge point fixing jig B202
• B202-03 38 mm and 50 mm diameter specimen - extension for gauge point fixing jig plungers B202
• B203 Dynamic Verification Device (optional)
• B201-52 5 Minute, two-part epoxy 24 ml (optional)

To test Ø 50x(h)135 mm specimens with DTS-30, DTS-130, SmartPulse, the following items are required:

• B200-07 Bottom loading platen for 50x135 mm specimen
• B200-08 Top loading platen for 50x135 mm specimen
• B253-04 AASHTO T342 LVDT mounting jig (3 pieces)
• B290-06N LVDT (1 mm) (3 pieces)
• B253-53 Gauge point (24 needed pieces)
• B253-05 Screwdriver hex bit with spherical head size 2 mm
• B202 Gauge Point Fixing Jig
• B202-01 Spacer for 135 mm specimen height to be used with gauge point fixing jig B202
• B202-03 38 mm and 50 mm diameter specimen - extension for gauge point fixing jig plungers B202
• B203 Dynamic Verification Device (optional)
• B201-52 5 Minute, two-part epoxy 24 ml (optional)