1. Home
  2. CEMENTO-MORTERO
  3. PREPARACIÓN DE MUESTRAS PARA ENSAYOS DE COMPRESIÓN
  4. Mezcladores de Mortero
  5. Mixmatic
Prueba Norma Productos
CEMENTO-MORTERO
Mixmatic Mixmatic

E092M KIT Mixmatic

( Cement-Mortar )
  • EN 196-1
  • EN 413-2
  • EN 459-2
  • NF P15-314
  • DIN 1164-5
  • DIN 1164-7
  • ASTM C305
  • AASHTO T162
  • EN 196-3
  • EN 480-1
  • ASTM C451
  • ASTM C359

AUTOMATIC PROGRAMMABLE COMPUTERIZED MORTAR MIXER HIGH-PERFORMANCE

Mixmatic has an extremely sturdy fabricated frame for an intensive laboratory use. Complete with stainless steel polished beater, mixing bowl and automatic sand dispensers having dimensions and geometry to grant the correct sand insertion, without residual and disaggregation between fine and coarse portions.

Main Features

  • Rugged design
  • Planetary transmission for silent and low maintenance operation.
  • Transparent CE-conform protection of the mixing area, to allow the mixture to look during the test.
  • Digitally controlled rotation speed.
  • Easy and fast bowl insertion and removal.
  • Display of elapsed time from the start of the mixing, speed of the beater, introduction of sand/water and status of the safety switch.
  • Safety system of bowl presence and correct position to avoid dangerous working, with double sensor of removed bowl with load/unload sequential discrimination.
  • Emergency stop button.

Power supply: 230V 50-60Hz 1ph
Dimensions: 580x570x830 mm
Weight: 85 kg approx.

Pedir información
Non sei loggato per vedere i manuali Entra

Firmware:

  • Different automatic programmable mixing cycles conforming to the a.m. Standards.
  • Possibility to program up to 30 automatic personalized mixing cycles, easy to set through Touch Screen.
  • Synchronised acoustic signals with cycle steps.
  • Electronic control unit that runs like a standard PC based on Windows operating system for the management and analysis of the data, test results, graphs. 
  • Unlimited memory storage trough the USB port.
  • Rotational motor feeded through inverter to grant the max. precision of the rotational speed, adjustable by the operator on the display.
  • Possibility of manual mixing cycle.
  • Possibility to select different languages.
  • Detailed indication of all the times (elapsed from the test start, residual to end test, elapsed from and test and bowl removal), state of cycle development with analogue bar, speed, active phase (sand, water), test state (correct execution or test interruption with lost results), type of current test.
  • 7'' TFT graphic display, 800x480 pixels, touch screen.