Matest.com

AMPT | SPT – Asphalt Mixture Performance Tester

  1. Home
  2. Асфальт
  3. Пейвтест - Статический И Динамический
  4. AMPT - Тестер эксплуатационных характеристик асфальта
  5. AMPT | SPT – Asphalt Mixture Performance Tester

Асфальт

Code: B200L
AASHTO T400 AASHTO T411 AASHTO TP132 AASHTO TP134 AASHTO T378 AASHTO TP107

The Pavetest AMPT (Asphalt Mixture Performance Tester) is a compact, fully self-contained servo-hydraulically controlled testing system designed for advanced asphalt mixture performance evaluation. It supports the Dynamic Modulus, Flow Number, and Flow Time tests developed under NCHRP Projects 9-19 and 9-29.

The AMPT is fully compliant with AASHTO T400, T411, TP132, TP134, T378, and TP107 and can perform a broad range of tests, including Indirect Tensile Dynamic Modulus, Incremental Repeated Load Permanent Deformation, Semi-Circular Bend, Overlay Testing, and Fatigue Analysis.

The system integrates Pavetest’s CDAS2 digital controller and TestLab software for full data acquisition, control, and automated analysis.
  • B201-52
    5 minute, two part epoxy 24 ml
  • B201-53
    Rubber membrane 0.3 mm thickness, Ø 100 mm (pack of 10)
  • S311-03
    Sealing ring 100x200 mm
  • B253-53
    Gauge point, 24 needed pieces
  • B200-10
    Latex membrane material cut in Ø 100 mm discs
  • B200-09
    Spacer for 130 mm specimen height
  • B200-20
    Bottom Loading Platen Ø 70x140 mm
  • B200-21
    Top Loading Platen Ø 70x140 mm
  • B202-05
    Extension for Ø 75 mm specimen for B202
  • B202-06
    Spacer for 120 mm height specimens, for B202
  • B270-19
    Membrane stretcher for asphalt specimen Ø 70 mm
  • B220-08N
    Load cell capacity ± 20 kN with adaptor
  • B292-01NSP
    Temperature transducer -80 +80 °C
  • Load capacity: 19kN (Static) - 17kN (Dynamic)
  • Actuator stroke: 30 mm
  • Specimen size: 100 mm (diameter) x 150 mm (h)
  • Temperature range: -10 °C to 70 °C *(B200L)
  • Confining pressure: 0 to 225 kPa
  • Noise level: Less than 70 dB at 2 m
  • Power Supply: 230V 50-60Hz 1ph 3.5kW
  • Dimensions: 1510(h) x 680(d) x 1200(w) mm
    1870(h) x 680(d) x 1200(w) mm with raised cell
  • Weight: 330 kg approx. (including oil)

The machine includes:

  • 8 Channel Control and Data Acquisition System (CDAS2) & TestLab software
  • 30 mm Actuator LVDT
  • Load cell (± 20 kN)
  • Pressure transducer (± 300 kPa)
  • Temperature transducer (-80 °C to + 80 °C)
  • Magnetically mounted on-specimen LVDT (2 mm) (3 pieces)
  • 105 mm bottom-loading platen
  • 105 mm top-loading platen

It requires pressurised air, with a minimum of 4 bars (not included).

 

B202: Gauge Point Fixing Jig

B202-04: Spacer for 130 mm specimen height to be used with gauge point fixing jig B202

B203: AMPT Dynamic Verification Device

H009-01EN: PC complete with LCD monitor 22”, keyboard, mouse, cables and installation of Testlab software.

B204-KIT Overlay kit according to ASTM WK26816. Comprises:

- B204-01 Overlay jig
- B204-02 Pair of Overlay Tester (OT) specimen plates
- B204-03 OT specimen preparation jig according to ASTM WK26816

B204-01-KIT Overlay kit according to TEX-248-F. Comprises:

- B204-01 Overlay jig
- B204-02 Pair of overlay tester (OT) specimen plates
- B204-13 OT specimen preparation jig according to TEX-248-F

B207-01-KIT AMPT Indirect Tensile (IDT) kit. Comprises:

- B207-01 AMPT IDT Jig
- B253-01 LVDT mounting Jig
- B253-03 Gauge point template (150 mm specimen)
- B290-04N AMPT Miniature LVDT (1 mm) (4 pieces)
- B253-53 Gauge point (32 pieces)
- B207-02 Cable gland (4 pieces)

B254-02-KIT AASHTO TP393 | ASTM D8044 SCB testing kit. Comprises:

- B208 SCB frame
- B254-10 Roller support
- B254-02 Springs and roller
- B254-03 Upgrade for AASHTO TP124 Method A

B253-01-KIT Combined IDT/SCB testing kit. Comprises:

- B253 Indirect tensile modulus, creep compliance and strength using on-specimen transducers
- B253-01 LVDT mounting jig
- B253-03 Gauge point template (150 mm specimen)
- B290-04N AMPT miniature LVDT (1 mm) (4 pieces)
- B253-53 Gauge point (32 pieces)
- B207-02 Cable gland (4 pieces)
- B254-10 Roller support
- B254-02 Springs and roller
- B254-03 Upgrade for AASHTO T393 Method A (2 pieces)

  • Thermoelectric (TE) Heating/Cooling More reliable and environmentally friendly than mechanical refrigeration & heating elements.
  • Magnetically mounted on-specimen transducer system, based on loose core LVDTs or optional epsilon extensometers.
  • Gauge point fixing jig facilitates gluing gauge points and the (top and bottom) platens for proposed AMPT
  • Direct Tension Cyclic Fatigue (S-VECD) Test.
  • Dynamic Verification Device.
  • DynafloTM HPS provides dynamic speed control of the pump motor ensuring quiet operation.
  • Optional built-in, silent, air compressor with associated air preparation equipment.