Test Standard Category

B023 Laboratory mixer

( Bitumen )

This laboratory mixer is suitable for a wide range of applications - mixing, emulsifying homogenising, disintegrating, dissolving - with an efficiency and flexibility unmatched by other machines.
The duplex mixing assembly is a two-arm construction with two heads facing in opposite directions; the upper head pulls materials down from the surface of the mix, while the lower head draws material up from the base of the mixing container. The upper coarse Tooth Disintegrating Head is designed to chop solid materials into small pieces and then expel them beneath the shroud. The lower head simultaneously draws in these partially disintegrated solids and reduces their size further.

Typical Applications:
- Rapid solution of rubbers and polymers into lubricating oils, non-flammable solvents and asphalt for the production of luboils, adhesives and bituminous compounds.
- Disintegration and dissolving solid resin for the production of varnish.
- Addition of powders into high viscosity liquids.

Power supply: 220V 1ph 50-60Hz 746W
Dimensions: 300x500x(h)940 mm
Weight: 25 kg approx.

Note: The laboratory mixer is not provided with the disintegrator head (B023-05) that must be ordered separately and then considered a necessary accessory.

Request information
  • Touch screen control with digital tachometer, programmable integral timer and amperage display, all accessed via the control panel.
  • Infinitely variable electronic speed control with integral on/off switch.
  • Construction of all wetted parts in grade 316L stainless steel, with the exception of the bushing which is bronze alloy.
  • A full range of interchangeable workheads and screens is available for all high shear mixers that workheads offer great versatility by allowing any machine to be adapted to perform a wide range of mixing operations.
  • Motor: 1 hp (746w), 220 Volt, Maximum Speed 10,000 rpm, 5 max rated amp draw at full load.

B023-06 Carbon brushes
B023-07 Spare bronze bushing
B023-08 Spare shaft coupling pin