Marshall stability
Indirect tensile test
CBR test
California Bearing Ratio test
Unconfined test
Vous n'êtes pas connecté pour consulter les manuels, Log in
Hardware specifications:
- 8 independent channels available for the load cells or potentiometrics transducers or stain gages for load, deformation or displacement measurements;
- Stabilized power supply of the analogical channels: 5 Vcc and 3 Vcc;
- Control frequency: up to 1 kHz;
- Nominal resolution: 24 bit;
- Sampling frequency: up to 2 kHz;
- Safety discrete On/off output;
- Graphic display colour touch-screen;
- Time and calendar system.
Firmware specifications:
- Instant display of the load measured by an exstensometric cell.
- Instant display of the deformation measured by 4 linear displacement transducers.
- Visualization of the graphic display of the test.
- Visualization of date and time.
- Semi-automatic configuration and calibration of all transducers connected.
- 20 steps lining that can be set by the enduser.
- Automatic correction of the axis origin for CBR/Marshall tests.
- Setting of all the parameters for test: alarms, zero threshold, endtest percentage, calculation parameters.
- Time/date and language selection (Italian, English, French, German, Spanish, Polish).
- Unlimited file for each type of test
- Symbols of pushbuttons functions
- Informative messages (planning alarms, load cell and strain transducer setting, etc.)
- Printing of the results on the incorporated thermal graphic printer (accessory C127N). Transfer and management via Ethernet of the filed data or real-time.
