Matest.com

Edomec Automatic Electromechanical Oedometer

  1. Home
  2. Sols
  3. Mécanique Sol - Consolidation
  4. Edomec Automatic Electromechanical Oedometer
Code: S261
BS 1377:5 ASTM D2435 ASTM D3877 ASTM D4546 AASHTO T216 NF P94-090-1 STAS 8942-1-89 UNI EN ISO 17892-5 NF P094-091

The Edomec Automatic Oedometer is a state-of-the-art electromechanical consolidation system designed for modern laboratories, minimizing manual intervention during oedometer testing.

Equipped with advanced PID control technology, the system guarantees precise load application across a wide range: high accuracy at low loads and rapid application at high loads, with high-frequency control up to 1 kHz.

Tests are easily configured via an intuitive interface, allowing users to freely set loads and acquisition times. The large display provides clear visualization of test data and graphs, making operations efficient and reliable.

Dimensions: 331x377x(h)662 mm
Weight: 50 kg approx.

Vous n'êtes pas connecté pour consulter les manuels, Log in

Thanks to its advanced firmware, Edomec becomes extremely customizable. It allows to:

  • Set different time acquisition windows for each load step;
  • Enable or disable settlement check and swelling check for each load step (NOTE: the condition set is the same for all steps);
  • Equipped with 4 channels, suitable for connection of load, displacement, deformation, LVDT, and strain gauge (by using an external adapter) transducers.
  • Semi-automatic configuration and calibration of all transducers connected.
  • The digital controller (PC) works on a Windows CE-based system and can be easily updated through the USB with no need to uninstall or move the controller.
  • Unlimited memory storage with: 2 USB ports, and an Ethernet port for remote control through the PC.
  • Standard load cell: 10kN (up to 25 kN on request)
  • Precision: 0.15 % at full range
  • Ram travel: up to 25 mm
  • Minimum speed: 0.00001 mm/min
  • Maximum speed: 99.99999 mm/min
  • Control frequency: up to 1 kHz
  • Horizontal clearance: 175 mm
  • Vertical clearance: 140 mm (with load cell), 273 mm (without load cell)
  • Maximum cell size dia: 112.8 mm
  • Safety function for the automatic machine stops when maximum load or maximum strain/deformation is reached
  • Automatic calculations and real-time display of graphs and results according to the standard
  • Maximum vertical force: up to 25 kN
  • Minimum speed: 0.00001 mm/min
  • Maximum speed: 99.99999 mm/min
  • 4 channels for acquisition and data processing system.
  • Sampling frequency of 2 kHz with a selectable sampling rate between 1 Hz and 20 Hz