Matest.com

Universal Digital Tester | Microprocessor Load Verification

  1. Home
  2. Béton
  3. Étalonnage De Force
  4. Testeur numérique avec microprocesseur
  5. Universal Digital Tester | Microprocessor Load Verification

Béton

Code: C138M
UNI 6326 DIN 51220 NF P18-411 ASTM E74 BS 1610 EN ISO 376

The Universal Digital Tester features a user-friendly menu-driven display for load cells (mod. C140–C140-10 and C142–C142-08) and enables precise verification of machine-applied loads, producing complete test certificates.

Three memorized verification programs, each with ten measurements, automatically calculate and display: applied load, measured load across cycles, average load, accuracy (%), repeatability, relative readability, and maximum error. The tester’s accuracy is ±0.5% of the indicated load.

Supplied in a robust, immersion-resistant carrying case with depressurization valve, including all necessary accessories for immediate operation.

Portable, reliable, and ideal for load verification in compliance with standard testing protocols.

Power supply: 110-230 V 1ph 50/60 Hz
Dimensions: 360x300x200 mm
Weight: 5 kg approx.

Vous n'êtes pas connecté pour consulter les manuels, Log in

HARDWARE:

  • High resolution converter up to 24 bit.
  • Excitation at 5Vcc
  • Standard signals: feed + feed – (0V) signal + signal – and shield
  • Remote push button to facilitate the readings’ confirmation during the calibration and the execution of the cycle of verification.

FIRMWARE:

  • Software administration up to ten load cells. It can be used one cell at a time, selectable among with the ones correctly configured and installed
  • Load measuring range: kN, kg, lb
  • Date of test and/or calibration
  • Linearization steps or polynomial
  • Digital filter of the first programmable order that is able to filter and settle the value acquired by the electrical cell.

FUNCTIONS:

  • Unlimited execution of verification tests
  • Code of the device under verification
  • Execution of the verification cycles according to the European EN Standards
  • Calculation of all the fundamental parameters required: repeatability and accuracy percentage error, residual error on the 0 point, maximum relative resolution and class of the device under verification
  • Sending all the data tests to PC, importable in excel - Direct USB printer connection
  • Administration of tests by Matcal software (accessory).

MAIN PAGE:

  • Visualization of all the device data of the selected cell
  • Date and time
  • Available languages: Italian, English, French, German and Spanish, Polish (other languages on request).

SOFTWARE:

  • To download to PC the results (accessory C155-10N)
  • Up to 5 decimal points visualization.
  • LCD display 800x480 pixel.
  • Large internal memory for load cell calibrations.
  • USB and LAN ports.
  • Language selection.