Test Standard Category

H010-02N Tensile/compression machine, Servo-plus evolution control unit

( Steel )

  • ASTM C39
  • ASTM E4
  • BS 1610
  • NF P 18-411
  • DIN 51220
  • AASHTO T22
  • EN 10002
  • EN ISO 6892-1
  • EN 7500-1
  • EN 15630-1

This machine is used to carry out tensile tests on steel reinforced bars from diameter 4 to 26 mm and flat max. 25x15 mm.
Horizontal and vertical daylights are now increased for easier specimen handling. It can also carry out compression tests on concrete cube specimens
max. side 150 mm and cylinders max. diameter 160x320 mm.
The loading piston, double action, is rectified and lapped. The piston is foreseen of an hydraulic maximum and minimum piston stroke’s security device, by avoiding any damage risk due to wrong manipulations of the unit. An hydraulic selector allows to select the tensile or the compression test. The heads holding the jaws are obtained from only one block of high resistance steel. The “V” autoclamping form allows a quick and practical churking of the specimen and the grips locking system ensures safe bar handling after failure. The machine is supplied  with pair of jaw-holders, but without hardened jaws and accessories for tensile and compression tests, which must be ordered separately (see accessories).


  • Maximum tensile load: 500 kN
  • Maximum compression load: 1500 kN
  • Distance between the jaws: min. 345 mm - max. 445 mm
  • Distance between the compression platens: 337 mm
  • Distance between the columns: 310 mm
  • Piston’s stroke: 120 mm
  • Precision and repeatability: ± 1% of read value
  • Power supply: 230 V 1 ph 50 Hz 750 W
  • Dimensions: 830x530x2000
  • Weight: 1150.. 1200 kg

Request information